Shop All Products
-
MKH50 Mic Foam
PRICES INCLUDES UK VAT The Radius range of condenser and shotgun microphone foams are made from high-quality acoustic foam designed to prevent plosives, boom swings swooshes and other light wind noise, whilst not interfering with high frequency audio capture. These are not the typical cheap mic foams that turn to dust in your fingers and fade away fast. Radius foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture. For shotgun microphones, the tapered foam is wider in the back to provide more side wind protection around the capsule. The foam narrows toward the front to provide additional protection around the interference tube whilst allowing for maximum transparency. These foams come in 3 internal diameter sizes and a variety of lengths to fit many broadcast, camera and recording microphones. Mic foams protect against plosives, swooshes and light wind noise Fits: Sennheiser MKH20, MKH30, MKH40, MKH50; Sony ECM-MS2 Fits other small pencil condenser and instrument microphones 24-25mm in diameter, with slots less than 5cm from end of mic Foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture
£15.00
-
5cm Mic Foam
PRICES INCLUDE UK VAT The Radius range of condenser and shotgun microphone foams are made from high-quality acoustic foam designed to prevent plosives, boom swings swooshes and other light wind noise, whilst not interfering with high frequency audio capture. These are not the typical cheap mic foams that turn to dust in your fingers and fade away fast. Radius foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture. For shotgun microphones, the tapered foam is wider in the back to provide more side wind protection around the capsule. The foam narrows toward the front to provide additional protection around the interference tube whilst allowing for maximum transparency. These foams come in 3 internal diameter sizes and a variety of lengths to fit many broadcast, camera and recording microphones. Mic foams protect against plosives, swooshes and light wind noise Fits other small pencil condenser and instrument microphones 19-22mm in diameter, with slots less than 5cm from end of mic Foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture
£15.00
-
Anti-Sway Bar for RAD Mount and Mini-ALTO
UK VAT INCLUDED IN PRICE The Anti-Sway Bar for all sizes RAD mounts & Mini-ALTOs acts as a brace across the RAD Hoops. This gives the suspension additional structural support, especially useful for longer/heavier microphones. If using softer hoops, it allows great compliance whilst preventing the suspension from swaying too much. This becomes all the more important when mics are being used in the Mini-ALTO - so the mic does not strike the inside of the basket. Made in the UK
£2.40
-
7cm Sanken CS-M1 Nimbus Windshield (19/22), Black Fur
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Fits: Sanken CS-M1 Fits other small hypercardioid microphones 19-22mm in diameter, with slots less than 7cm from end of mic and that have standard length preamps Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Made from high quality acoustic synthetic fur with a porous open cell foam core
£67.20
-
Pair of RAD 19/20mm Mic Clips (Clips Only - No Hoops)
Pair of RAD mount 19-20mm mic clips with no soft rubber coating. Fits in all firmness styles of RAD-1 or RAD-2 isolation hoops. These clips do not come with an additional safety strap. Replacement mic clips for 19-20mm microphones like DPA 4018C, LOM BasicUcho, Sennheiser MKH 8050, Sennheiser 8060 and Deity S-Mic 2
£18.00
-
Mic Bands, 5-Pack
Radius mic bands are a handy way to add a soft, silent and specific "stopping point" for slip-on windshields or foam mic gags. The bands can also be used to cover mic body switches & XLR connections and creating a moisture barrier, instead of wrapping the mic in electrical tape. The mic bands come in packs of black and multi-colour, the colours being an easy way to visually identify different mics from a distance. The mic bands are made from high quality TPE silicone (latex free). MADE IN THE U.K.
£12.00
-
Mini Windcover for Uši / Clippy / Verdi
These small Radius Mini Windcovers are made from high quality synthetic acoustic fur to specifically fit over the small diameter Lom Uši, FEL Clippy and Oaka Verdi microphones. These windcovers have an internal foam to block out unwanted wind noise, while maintaining acoustic transparency of high frequencies. Mini windcovers are available in black fur colour.
£30.00 - £48.00
-
Pair of RAD-2 Hoops, Soft Firmness (Light Blue)
Pair of RAD-2 Hoops in soft firmness (light blue). These hoops provide a softer microphone suspension than standard hoops (black). The extra bracing along the top allows for use with longer mics or when using a slide-on windshield on the front. These hoops will fit in all RAD shock mount top brackets. This product consists of isolation hoops and screws only - does not come fitted with mic clips.
£18.00
-
B STOCK - Replacement Fur Wind Covers for Rycote Windshield Blimps
THESE ITEMS ARE B STOCK OR SAMPLES WITH SLIGHT IMPERFECTIONS LIMITED STOCK AVAILABLE The Radius windcovers are made from our high-quality longer-haired synthetic acoustic fur and come with a smooth internal lining and draw string. The windcovers come in a range of standard sizes to specifically fit a variety of brands' windshield blimps as replacement windcovers. We are happy to take requests for different kinds of custom windcovers using different materials, in different colors and with unbranded / your branded labels. Minimum order quantities for customer orders, certain materials and sizes may be applicable.
£48.00
-
18cm Nimbus Windshield (19/22)
PRICES INCLUDE UK VAT The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits: Rode NTG-3; Sanken CS-3e; Sennheiser ME66 K6, MKH416, MKH418-S; Sony ECM-678, ECM-680S Fits other shotgun microphones 19-22mm in diameter and with slots less than 18cm from end of mic Made in England from high quality acoustic synthetic fur with a porous open cell foam core
£79.20
-
Mini-ALTO Thin 3-pin XLR Cable, Short, 260mm
This low profile thin 3-Pin XLR jumper cable is made to fit Mini-ALTO windshield kits. The cable itself is 260mm long and has a 90-degree female XLR connection and straight male XLR connection. It is made using 2.1mm Mogami cable and Neutrik connectors. The cable also comes fitted with a "blue cable hole plug" for using with a Mini-ALTO. The size and length of this cable is designed for primarily using with a Mini-ALTO or RAD Mount with boom mount connection. If using with a RAD Pistol Grip handle, a longer version of this cable is recommended.
£54.00
-
5cm MKH50 Mushroom Foam & Fur Windcover (24/25)
The Radius MKH50 Mushroom Mic Foam (24/25) is a designed to fit the MKH50 and other 24-25mm diameter microphones when used with a RAD shock mount or other style mount. The mic has a thick circular end around the capsule and a thinner "stem" to provide more grip around the body of the mic. Inside, there is cavity (ø40mm) that creates dead air space around the capsule. We have also added a non-slip silicone to the entrance of each foam, to help prevent the foams from slipping off. Each foam can be found with or without the fur windcover too - giving you that little bit extra wind protection! All our foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture.
£42.00
-
RAD-3 Shock Mount with 3-Pin XLR Cable
The RAD-3 Shock Mounts are designed for for use with standard length shotgun microphones and small condenser pencil microphones with slide-on fur windshields on the front. The RAD-3 mounts provide the same isolation and support as the RAD-2, but come with a pistol grip handle instead of a boom adaptor. It provides exceptional isolation from movement, handling noise and other vibrations associated with booming. The mount has soft-coated universal mic clips to fit any mic 19-25mm in diameter. Each mount includes a pair of standard firmness hoops (black), a pair of softer hoops (light blue) and a pair of extra firm hoops (dark blue). The RAD-3 hoops are slightly thicker than RAD-1 hoops and have an extra 3mm of bracing on top to hold the extra weight of front-heavy microphones. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Great microphone shock mount isolation when booming indoors, outdoors or on run-&-gun shoots Recommended for use with shotgun microphones with a diameter of 19-25mm, up to 250mm in length. Can be used indoors and outdoors with or without slide-on windshields. Fits Sennheiser MKH416, Sennheiser MKH8060, Sennheiser MKE600, Schoeps CMIT 5, Schoeps SuperCMIT, Schoeps MiniCMIT, Sanken CS-3, Rode NTG-3, DPA 2017, DPA 4017 and other shotgun microphones Also use the RAD-2 with super-cardioid, cardioid and omni condenser mics when using a slide-on Radius Nimbus Windshield or other style deadcat fur on the front. Comes with a pistol grip handle and embedded XLR holder instead of a boom adaptor. The handle has a 3/8 threaded bottom so it can also be attached to boom poles and stands. Also comes with 3 pairs of interchangeable RAD-2 hoops included - standard firmness (black), soft firmness (light blue) and extra firm (dark blue). 3-Pin XLR jumper cable included
£138.00
-
MKH60 Shotgun Mic Foam
PRICES INCLUDE UK VAT The Radius range of condenser and shotgun microphone foams are made from high-quality acoustic foam designed to prevent plosives, boom swings swooshes and other light wind noise, whilst not interfering with high frequency audio capture. These are not the typical cheap mic foams that turn to dust in your fingers and fade away fast. Radius foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture. For shotgun microphones, the tapered foam is wider in the back to provide more side wind protection around the capsule. The foam narrows toward the front to provide additional protection around the interference tube whilst allowing for maximum transparency. These foams come in 3 internal diameter sizes and a variety of lengths to fit many broadcast, camera and recording microphones. Mic foams protect against plosives, swooshes and light wind noise Fits Sennheiser MKH60 and other shotgun microphones 24-25mm in diameter, with slots less than 18cm from end of mic Foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture
£21.00
-
Mini-ALTO 300, RAD-2 Kit & PG Handle
The Mini-ALTO & RAD-2 Kit is a compact and versatile microphone windshield and shock mounting system for location sound professionals. It features the award winning RAD shock mount for exceptional isolation from handling noise, an ultra-lightweight 2-part magnetic "pod" windshield that can be fitted/unfitted in seconds and a removable fur cover for added wind protection. The Mini-ALTO has been designed to be fast and easy-to-use with almost all small condenser, short shotgun and standard shotgun sized microphones. With a diameter of just 85mm, the Mini-ALTO is the smallest "full-coverage" zeppelin windshield available in the professional audio recording industry. Even at this size, the Mini-ALTO will achieve wind reduction for up to -40dB with its included fur cover, which is comparable to larger pill-shaped windshields. The Mini-ALTO 250 / 280 / 300 windshield kits come in full kits which include the windshield, a RAD-2 Mount, spare hoops with different suspension firmness, a fur windcover, a "smiley face" adaptor, pistol grip handle and a magnetic stowage holder for the windshield with a caribiner clip. The full kits are available in versions with and without custom fitted XLR cables. Made in the U.K. Fits: Audio-Technica AT897; Rode NTG2, NTG3, NTG4+; Sanken CS-3e; Schoeps CMIT 5 (with straight XLR), Super CMIT; Sennheiser MKE600, MKH416 (with straight XLR), MKH60; Sony ECM-674
£432.00 - £480.00
-
Mini-ALTO 115 Add-On Kit
The Mini-ALTO Windshield 115 Add-On Kit is made to be fitted on top of any existing RAD-1, RAD-2 or RAD-3 shock mount for small condenser microphones. This kit includes an ultra-lightweight 2-part magnetic "pod" windshield, a Smiley Face Adaptor that connects to the RAD shock mount, a removable fur windcover, and a magnetic Windshield Stowage Holder with Carabiner Clip. The Mini-ALTO windshield system has been designed to be fast and easy-to-use with almost all small condenser, short shotgun and standard shotgun sized microphones. With a diameter of just 85mm, the Mini-ALTO is the smallest "full-coverage" zeppelin windshield available in the professional audio recording industry. Even at this size, the Mini-ALTO will achieve wind reduction for up to -40dB with its included fur cover, which is comparable to larger pill-shaped windshields. Included in kit: Mini-ALTO 115 size windshield, Fur Windcover, Smiley Face Adaptor, Magnetic Windshield Stowage Holder with Carabiner Clip and a Pair of RAD Cable Straps Fits: DPA 4018C; Neumann KM 100 Series; Schoeps CMC1 Series; Sennheiser MKH8020; MKH8030; MKH8040; MKH8050
£330.00
-
Puffer Urchin Lav windshield, Foam Core, Black - Single/Pair
PRICE INCLUDES UK VAT The Puffer Urchin Lav windshields are made to fit miniature lavalier mics 2-4mm in diameter. The Puffer Urchins are made from synthetic black fur with a built in foam core for added wind protection. These have a low profile that is approximately 35mm across from end-to-end. Puffer Urchins provide great protection for outdoor ENG interviews or other situations where the lav mics are exposed to more wind. These also have a unique blue "safety strap" which holds the fur firmly in place. We sell these as a SINGLE pack or a PAIR.
£18.00 - £33.00
-
RAD-3 Shock Mount (Pistol Grip Handle)
The RAD-3 Shock Mounts are designed for for use with standard length shotgun microphones and small condenser pencil microphones with slide-on fur windshields on the front. The RAD-3 mounts provide the same isolation and support as the RAD-2, but come with a pistol grip handle instead of a boom adaptor. It provides exceptional isolation from movement, handling noise and other vibrations associated with booming. The mount has soft-coated universal mic clips to fit any mic 19-25mm in diameter. Each mount includes a pair of standard firmness hoops (black), a pair of softer hoops (light blue) and a pair of extra firm hoops (dark blue). The RAD-3 hoops are slightly thicker than RAD-1 hoops and have an extra 3mm of bracing on top to hold the extra weight of front-heavy microphones. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Great microphone shock mount isolation when booming indoors, outdoors or on run-&-gun shoots Recommended for use with shotgun microphones with a diameter of 19-25mm, up to 250mm in length. Can be used indoors and outdoors with or without slide-on windshields. Fits Sennheiser MKH416, Sennheiser MKH8060, Sennheiser MKE600, Schoeps CMIT 5, Schoeps SuperCMIT, Schoeps MiniCMIT, Sanken CS-3, Rode NTG-3, DPA 2017, DPA 4017 and other shotgun microphones Also use the RAD-2 with super-cardioid, cardioid and omni condenser mics when using a slide-on Radius Nimbus Windshield or other style deadcat fur on the front. Comes with a pistol grip handle and embedded XLR holder instead of a boom adaptor. The handle has a 3/8 threaded bottom so it can also be attached to boom poles and stands. Also comes with 3 pairs of interchangeable RAD-2 hoops included - standard firmness (black), soft firmness (light blue) and extra firm (dark blue). NOTE: XLR jumper cable not included
£102.00
-
Mini Lav Urchin Windshields, (Black,Grey,White) - Single/Pair
PRICES INCLUDE UK VAT The Mini Lav Urchin windshields are made to use with lavalier mics, placed on the outside of clothing, using a clip or other fixture. These Mini Urchins are small in profile (Approx. 20mm in size). The Urchin fur covers are sized to firmly fit over mics like the SANKEN COS-11 and DPA 6060. They have a unique blue band which holds them firmly into place, eliminating the risk of your lav sliding off. Colour options: Black, Grey or White Each Lav Urchin is sold as a SINGLE pack or as a PAIR. If you're looking for a solution for the DPA 4060 or larger microphones, check out the Large Hole Lav Urchin Windshield
£18.00 - £33.00
-
5cm MKH50 Nimbus Windshield (24/25)
PRICES INCLUDE UK VAT The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits: Sennheiser MKH20, MKH30, MKH40, MKH50; Sony ECM-MS2 Fits other small pencil condenser and instrument microphones 24-25mm in diameter, with slots less than 5cm from end of mic and that have standard length preamps Made in England from high quality acoustic synthetic fur with a porous open cell foam core
£67.20
-
15cm Nimbus Windshield (19/22)
PRICES INCLUDE UK VAT The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits: Audio-Technica AT897, BP4029; Neumann KMR 81 i; Rode NTG-1, NTG-2; Sanken CS-1e, CSS-50; Schoeps CMIT 5 U; Sennheiser MKE600 Fits other small shotgun microphones 19-22mm in diameter and with slots less than 15cm from end of mic Made in England from high quality acoustic synthetic fur with a porous open cell foam core
£79.20
-
Cable Techniques 18" Low-Profile XLR-3 Cable
18" (inch) Low-Profile XLR-3F to XLR-3M Adjustable Angle Low-Profile XLR 3-pin cable. The XLR side-exit cable outlet orientation is user adjustable from 30° to 150° and 210° to 330° from the release button allowing for perfect integration into any location audio kit. The cable diameter is a slim 3.2mm yet extremely durable with an ultra-flexible PUR Polyurethane Jacket material that is crush resistant, tear-resistant and cold-resistant. Perfect for Lectrosonics UCR type receivers into XLR inputs of field gear like Sound Devices 633, 688, 788T, 302, 552, Zaxcom, Zoom and many others. Our Lo-Pro cables are up to 40% lighter than standard XLR cables while significantly reducing the profile of anything they are plugged into. We use premium quality slim cable that is crush resistant, tear-resistant, cold-resistant and easy to wind.
£48.00
-
RAD-1 Shock Mount, CCM/CMC Edition
The RAD-1 Shock Mount, CCM/CMC Edition comes in an all black & grey matte finish with no blue colour on the hoops or mic clips. They are designed to be used with Schoeps CCM and Collette series microphones, including the CMD 42. This suspension provides exceptional isolation from movement, low-end handling noise and other vibrations associated with booming. The mount comes fitted with two dark grey rubber coated universal mic clips and an extra 8mm black coloured rear mic clip for Lemo connectors. Each mount includes a pair of standard firmness hoops (black) and a pair of softer hoops (dark grey) -- so you can get the best isolation for your style of booming. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Compatibility: Schoeps CCM microphones and capsules with amplifiers CMC1-U, CMC1-L and CMC1-K. Also recommended for use with CMC6, CMC6-XT, CMC6/CUT60 and CMD42 when using a standard mic foam for wind protection (use a RAD-2 with heavier slide on wind protection). Comes fitted with two dark grey rubber coated mic clips and an extra 8mm uncoated mic clip for use with Lemo connectors. Comes with 360-degree rotatable XLR holder and 2 pairs of interchangeable RAD-1 hoops included - standard firmness (black) and soft firmness (dark grey)
£84.00
-
Mini-ALTO 115 Fur Windcover
Replacement fur windcovers for the Mini-ALTO 115 size
£86.40
-
12cm Nimbus Windshield (19/22), Black Fur
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Fits: Audio-Technica AT875R, BP4073; DPA 4017; Schoeps MiniCMIT; Sennheiser MKH8060; Sony ECM-673, ECM-674, ECM-VG1 Fits other small shotgun microphones 19-22mm in diameter and with slots less than 12cm from end of mic Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Made from high quality acoustic syntethic fur with a porous open cell foam core Audio-Technica AT875R, BP4073; DPA 4017; Schoeps MiniCMIT; Sennheiser MKH8060; Sony ECM-673, ECM-674, ECM-VG1
£74.40
-
Pair of RAD 12.5mm Mic Clips (Clips Only - No Hoops)
Pair of RAD mount 12.5mm mic clips with no soft rubber coating. Fits in all firmness styles of RAD-1 or RAD-2 isolation hoops. No additional safety strap added. Replacement mic clips to fit 12.5-14.5mm microphones like the LOM Uši Pro and Core Sound TetraMic 1st Order Ambisonic.
£18.00
-
ME 66 Shotgun Mic Foam
PRICES INCLUDE UK VAT The Radius range of condenser and shotgun microphone foams are made from high-quality acoustic foam designed to prevent plosives, boom swings swooshes and other light wind noise, whilst not interfering with high frequency audio capture. These are not the typical cheap mic foams that turn to dust in your fingers and fade away fast. Radius foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture. For shotgun microphones, the tapered foam is wider in the back to provide more side wind protection around the capsule. The foam narrows toward the front to provide additional protection around the interference tube whilst allowing for maximum transparency. These foams come in 3 internal diameter sizes and a variety of lengths to fit many broadcast, camera and recording microphones. Mic foams protect against plosives, swooshes and light wind noise Fits Sennheiser ME66 K6 Foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture
£21.00
-
10cm Nimbus Windshield (19/22)
PRICES INCLUDE UK VAT The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits many camera microphones like: Sony ECM-XM1, HDV Z7; JVC MV-P615 Fits other small shotgun microphones 19-22mm in diameter and with slots less than 10cm from end of mic Made in England from high quality acoustic synthetic fur with a porous open cell foam core
£74.40
-
Replacement RAD Mount Anti-Friction Washer, Light Blue (5 pack)
PRICE INCLUDES UK VAT The RAD Mount Anti-Friction Washer is a simple upgrade designed to make positioning and adjusting your RAD mount, without the need of fully undoing the pivot knob. Fitted between the RAD mount bracket & the boom adaptor or handle, it reduces the resistance caused by the locking teeth, allowing smoother movement and more precise angle adjustments. Manufactured from the same durable TPE soft material used throughout the Radius range, the anti-friction washer integrates seamlessly with existing RAD mounts and Mini-ALTO kits. Its low-profile design maintains the strength and reliability of the mounting system while adding a subtle Radius blue accent.
£9.60
-
Mini-ALTO 280 Add-On Kit
The Mini-ALTO Windshield 280 Add-On Kit is made to be fitted on top of any existing RAD-2 or RAD-3 shock mount for short shotgun microphones. This kit includes an ultra-lightweight 2-part magnetic "pod" windshield, a Smiley Face Adaptor that connects to the RAD shock mount, a removable fur windcover, and a magnetic Windshield Stowage Holder with Carabiner Clip.The Mini-ALTO windshield system has been designed to be fast and easy-to-use with almost all small condenser, short shotgun and standard shotgun sized microphones. With a diameter of just 85mm, the Mini-ALTO is the smallest "full-coverage" zeppelin windshield available in the professional audio recording industry. Even at this size, the Mini-ALTO will achieve wind reduction for up to -40dB with its included fur cover, which is comparable to larger pill-shaped windshields.Fits: Audio-Technica BP4029; Deity S-Mic 2, S-Mic 3; Rode NTG3, NTG4; Rycote HC-22; Sanken CS-2, CSR-2; Schoeps CMIT 5 (with 90-degree XLR), CMC6-KMIT, CMD42-KMIT; Sennheiser MKE600 (with 90-degree XLR), MKH416 (with 90-degree XLR), MKH8018 (with straight XLR); Sony ECM-680S, ECM-678/9X
£342.00
-
RAD-2 Shock Mount, Dark Edition w/ 3-Pin XLR Cable
The RAD-2 Shock Mount, Dark Edition comes in an all black & grey matte finish with no blue colour on the hoops or mic clips. They are designed for for use with standard length shotgun microphones and small condenser pencil microphones with slide-on fur windshields on the front. It provides exceptional isolation from movement, handling noise and other vibrations associated with booming. The mount has soft-coated universal mic clips to fit any mic 19-25mm in diameter. Each mount includes a pair of standard firmness hoops (black), a pair of softer hoops (dark grey) and a pair of extra firm hoops (dark blue). The RAD-2 hoops are slightly thicker than RAD-1 hoops and have an extra 3mm of bracing on top to hold the extra weight of front-heavy microphones. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Recommended for use with shotgun microphones with a diameter of 19-25mm, up to 250mm in length. Can be used indoors and outdoors with or without slide-on windshields. Comes with 360-degree rotatable XLR holder and 3 pairs of interchangeable RAD-2 hoops included - standard firmness (black), soft firmness (dark grey) and extra firm (dark blue) Fits Sennheiser MKH416, Sennheiser MKH8060, Sennheiser MKE600, Schoeps CMIT 5, Schoeps SuperCMIT, Schoeps MiniCMIT, Sanken CS-3, Rode NTG-3, DPA 2017, DPA 4017 and other shotgun microphones 3-Pin XLR cable included
£120.00
-
RAD-1 Shock Mount, Dark Edition with 3-Pin XLR Cable
The RAD-1 Shock Mounts, Dark Edition comes in an all black & grey matte finish with no blue colour on the hoops or mic clips. They are designed to be used with short shotgun and small condenser pencil microphones (super-cardioid, cardioid and omni). This suspension provides exceptional isolation from movement, handling noise and other vibrations associated with booming. The mount has soft-coated universal mic clips (in dark grey colour) to fit any mic 19-25mm in diameter. Each mount includes a pair of standard firmness hoops (black) and a pair of softer hoops (dark grey) -- so you can get the best isolation for your style of booming. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Our highest level of microphone shock mount isolation in an all matte black & grey colour Suitable to cardioid & super-cardioid pencil mics with a diameter of 19-25mm, up to 150mm in length Fits Schoeps CCM & CMC Series, Sennheiser MKH50, Sennheiser MKH8020, Sennheiser MKH8040, Sennheiser MKH8050, DPA 4018, Neumann KM 100 and other small pencil condenser microphones Suitable primarily for indoor use or outdoors with no winds when using the mic by itself or the mic with only a foam windscreen Comes with 360-degree rotatable XLR holder and 2 pairs of interchangeable RAD-1 hoops included - standard firmness (black) and soft firmness (dark grey) 3-Pin XLR cable included
£120.00
-
5cm MKH50 Nimbus Windshield (24/25), Black Fur
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits: Sennheiser MKH20, MKH30, MKH40, MKH50; Sony ECM-MS2 Fits other small pencil condenser and instrument microphones 24-25mm in diameter, with slots less than 5cm from end of mic and that have standard length preamps Made in England from high quality acoustic synthetic fur with a porous open cell foam core
£67.20
-
B STOCK - Fur Windcover for Cinela Cosi, Black/Grey
THESE ITEMS ARE B-STOCKThese items may have slight imperfections to the fur or sewing, however they are still functionalThe Radius Windcovers are made from a high quality, multi-piled synthetic acoustic fur. Each windcover is lined with a smooth internal lining, that gives additional wind protection. Key Features: Each windcover comes with 2 snap fasteners to seal the windshield in. The windcover slips under the suspension. We offer Fur Windcovers for the Cinela Cosi in a range of sizes: X Large - (Cosi-XL-19) Large - (Cosi-L-19 4017C , Cosi-L-20 CMC, Cosi-L-21 Mini CMIT, Cosi-L-CMS50, Cosi-L-8060, Cosi-L-8060-MZF, Cosi-L-MKH50)Medium - (Cosi-M-19, Cosi-M-22a, Cosi-M-22b) Small - (Cosi-S-19, Cosi-s-CCM)X Small - (Cosi-XS-CMC1U, Cosi-XS-CMC1L, Cosi-XS-19) You can now find more fur wind protection solutions for Cinela, Rode Blimps and Portable recorder/On Camera microphones. If you can't find what you're looking for, please contact us directly for custom orders. We are happy to take requests for different kinds of custom windcovers using different materials, in different colors and with unbranded / your branded labels. Minimum order quantities for customer orders, certain materials and sizes may be applicable. Disclaimer: This item is not intended to replace the fitted fur supplied to the COSI, but instead for extra protection in extreme high wind conditions. When using multiple layers of fur, it may impact the HF performance and handling noise of the COSI’s suspension. Variants of this product are sold for use with products manufactured by: Sennheiser Electronic Gmbh & Co, Shure Inc. Røde Microphones, Rycote Microphone Windshields Ltd, Cinela, DPA Microphones. Any reference to the products name, design and/or trademark is only intended to identify compatibility. Radius windshields is not sponsored by, connected to or affiliated with and share no interest, including any licence, with the aforementioned companies/corporations.
£48.00
-
18cm Nimbus Windshield (19/22), Black Fur
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits: Rode NTG-3; Sanken CS-3e; Sennheiser ME66 K6, MKH416, MKH418-S; Sony ECM-678, ECM-680S Fits other shotgun microphones 19-22mm in diameter and with slots less than 18cm from end of mic Made in England from high quality acoustic synthetic fur with a porous open cell foam core
£79.20
-
Pair of RAD 8mm Mic Clips (Clips Only - No Hoops)
Pair of RAD mount 8mm mic clips with no soft rubber coating. Replacement mic clips for microphones with Lemo or MZL cables. Fits in all firmness styles of RAD-1 or RAD-2 isolation hoops. These clips do not come with a safety strap.
£18.00
-
RAD-1 Shock Mount, Dark Edition
The RAD-1 Shock Mounts, Dark Edition comes in an all black & grey matte finish with no blue colour on the hoops or mic clips. They are designed to be used with short shotgun and small condenser pencil microphones (super-cardioid, cardioid and omni). This suspension provides exceptional isolation from movement, handling noise and other vibrations associated with booming. The mount has soft-coated universal mic clips (in dark grey colour) to fit any mic 19-25mm in diameter. Each mount includes a pair of standard firmness hoops (black) and a pair of softer hoops (dark grey) -- so you can get the best isolation for your style of booming. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Our highest level of microphone shock mount isolation in an all matte black & grey colour. NO XLR CABLE. Suitable to cardioid & super-cardioid pencil mics with a diameter of 19-25mm, up to 150mm in length Fits Schoeps CCM & CMC Series, Sennheiser MKH50, Sennheiser MKH8020, Sennheiser MKH8040, Sennheiser MKH8050, DPA 4018, Neumann KM 100 and other small pencil condenser microphones Suitable primarily for indoor use or outdoors with no winds when using the mic by itself or the mic with only a foam windscreen Comes with 360-degree rotatable XLR holder and 2 pairs of interchangeable RAD-1 hoops included - standard firmness (black) and soft firmness (dark grey)
£84.00
-
B STOCK - 18cm Nimbus Windshield (19/22)
THESE ITEMS ARE B-STOCK AND HAVE SLIGHT IMPERFECTIONS! LIMITED STOCK AVAILABLE The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the only slip-on fur windscreens to incorporate small "pepper pot" hole openings on the end caps to reduce air pressure near the capsule. This unique feature diminishes the “muddy or muffled” sound that can occur at some frequencies and adds extra clarity when recording with certain microphones. Each Nimbus is made using 25mm length dark grey, acoustic synthetic fur and a porous open cell foam internal core. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design adds extra clarity at certain frequencies by reducing air pressure near the microphone capsule Fits: Rode NTG-3; Sanken CS-3e; Sennheiser ME66 K6, MKH416, MKH418-S; Sony ECM-678, ECM-680S Fits other shotgun microphones 19-22mm in diameter and with slots less than 18cm from end of mic Made in England from high quality acoustic synthetic fur with a porous open cell foam core.
£48.00
-
12cm Shotgun Foam (19/22), Royal Blue Flock
THESE ITEMS ARE B STOCK LIMITED STOCK AVAILABLE Note: These are *NOT* Chroma-Key Blue Features Slip-on foam wind protection Flocked in a beautiful Limited time offer of “Royal Blue (Pantone 287C)” Up to -10dB wind noise reduction Suitable for the following mics: Audio-Technica BP4073, AT875R DPA 4017C. 4017B, 2017 Deity Deity S-Mic 2S, Deity S-Mic 3S Schoeps MiniCMIT Sennheiser MKH 8060
£21.60
-
Rode Blimp RAD Hoop Adaptor, Pair
UK VAT INCLUDED IN PRICEThe Røde Blimp RAD Hoop adaptor simply allows any Radius RAD Hoop to be fitted onto the Røde Mk2 Blimp. Remove & retain the screw holding the Lyre on the Blimp suspension, fit the adaptor & then RAD hoop - retighten with the original Rode screw.For the FREE Downloadable 3D printer files, please contact hello@radiuswindshields.com. Made in the UK
£12.00
-
£60.00
-
Pair of RAD-2 Hoops, Soft Firmness 62-shore (Dark Grey - Hoops Only)
Replacement pair of soft firmness, Dark Edition (dark grey) RAD-2 hoops for use with any RAD mount base or Radius windshield blimp. Hoops only (mic holder clips sold separately). Hoops have 3mm spine / bracing on top for use with longer or front-heavy mics. Comes with 4 mounting screws - 2 x 8mm long (for base) and 2 x 12mm long (for tops) Screws Included
£18.00
-
Cable Techniques Color Caps SET for Low-Profile XLR Connectors
Dual Set of LoPro color caps for CT-LPXLR Low-Profile right angle XLR Connectors. Interchangeable Cap colors to customize your color profile at any time. Set includes (2) each Black, Red, Blue, Green, Yellow, Orange, White, Gray, Purple and Brown. Injection moulded in rock-solid durable ABS thermoplastic to assure maximum impact resistance and toughness. Compatible with all Cable Techniques Low-Profile right angle XLR connectors. Standard cap accepts cable diameters up to 3.4mm.
£24.00
-
4cm Handheld Mic Foam (55mm Børe)
The Radius range of handheld microphone foams are made from high-quality acoustic foam designed to prevent plosives, hand movement swooshes and other very light wind noise, whilst not interfering with high frequency audio capture. These are not the typical cheap mic foams that turn to dust in your fingers and fade away fast. Radius foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture. These foams come in 3 different sizes to fit most sizes of reporter, vocal and other handheld microphones. Compatible with: Electro-Voice RE-50, Neumann KMS 104/105, Sennheiser e835, Shure SM58 Mic foams protect against plosives, swooshes and light wind noise Foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture Dimensions: 40mm x 55mm Hole We also stock 3.5cm & 3cm handheld micsTax included in price
£18.00
-
Mini-ALTO 250 Add-On Kit
The Mini-ALTO Windshield 300 Add-On Kit is made to be fitted on top of any existing RAD-2 or RAD-3 shock mount for short shotgun microphones. This kit includes an ultra-lightweight 2-part magnetic "pod" windshield, a Smiley Face Adaptor that connects to the RAD shock mount, a removable fur windcover, and a magnetic Windshield Stowage Holder with Carabiner Clip. The Mini-ALTO windshield system has been designed to be fast and easy-to-use with almost all small condenser, short shotgun and standard shotgun sized microphones. With a diameter of just 85mm, the Mini-ALTO is the smallest "full-coverage" zeppelin windshield available in the professional audio recording industry. Even at this size, the Mini-ALTO will achieve wind reduction for up to -40dB with its included fur cover, which is comparable to larger pill-shaped windshields. Fits: Audio-Technica AT8022, BP4025, BP4073; DPA 4017B; Neumann KMR 81; Rode NTG1, NTG4 (with 90-degree XLR), NTG5; Rycote HC-22 (with 90-degree XLR); Sanken CSS-50; Schoeps CMC6-KMIT, CMD42-KMIT (with 90-degree XLR); Sennheiser MKH8018 (with 90-degree XLR); Shure VP89S; Sony ECM-VG1, ECM-670, ECM-673
£342.00
-
Mini-ALTO 210 Fur Windcover
Replacement fur windcovers for the Mini-ALTO 210 size
£86.40
-
Mini-ALTO 180 Fur Windcover
Replacement fur windcovers for the Mini-ALTO 180 size
£86.40
-
Large Hole Urchin Lav windshield, Black - Single/Pair
PRICES INCLUDE UK VAT The Large Hole Urchin Lav windshields are made to use with lavalier mics placed on the outside of clothing using a clip or other fixture. The Large Hole Urchin fur covers are sized to firmly fit over mics like the DPA 4060, Voice Technologies VT506 Series & Countryman B3. They have a unique blue band which holds them firmly into place, taking away the risk of them slipping off. You can choose from a SINGLE pack or a PAIR.
£18.00 - £33.00
