Radius Windshields is a trading brand of Slapton Sound Limited, a company registered in England, No. 13922515. The company's registered office is Harris & Trotter LLP, 101 New Cavendish Street, London W1W 6XH. Company VAT No. GB 437065592; Company EORI No: GB 092765283000
Products
-
10cm Nimbus Windshield (19/22)
PRICES INCLUDE UK VAT The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits many camera microphones like: Sony ECM-XM1, HDV Z7; JVC MV-P615 Fits other small shotgun microphones 19-22mm in diameter and with slots less than 10cm from end of mic Made in England from high quality acoustic synthetic fur with a porous open cell foam core
£74.40
-
10cm Nimbus Windshield (19/22), Black Fur
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Fits older model camera microphones like: Sony ECM-XM1, HDV Z7; JVC MV-P615 Fits other small shotgun microphones 19-22mm in diameter and with slots less than 10cm from end of mic Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Made from high quality acoustic synthetic fur with a porous open cell foam core Sony ECM-XM1, HDV Z7; JVC MV-P615
£74.40
-
10cm Shotgun Mic Foam (19/22)
PRICES INCLUDE UK VAT The Radius range of condenser and shotgun microphone foams are made from high-quality acoustic foam designed to prevent plosives, boom swings swooshes and other light wind noise, whilst not interfering with high frequency audio capture. These are not the typical cheap mic foams that turn to dust in your fingers and fade away fast. Radius foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture. For shotgun microphones, the tapered foam is wider in the back to provide more side wind protection around the capsule. The foam narrows toward the front to provide additional protection around the interference tube whilst allowing for maximum transparency. These foams come in 3 internal diameter sizes and a variety of lengths to fit many broadcast, camera and recording microphones. Mic foams protect against plosives, swooshes and light wind noise Fits: JVC GY HD 200; JVC MV-P615U; Sony ECM-XM1; Sony ECM-CG1 Fits other short shotgun and camera microphones 19-22mm in diameter, with slots less than 10cm from end of mic Foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture
£18.00
-
12cm Nimbus Windshield (19/22)
PRICES INCLUDE UK VAT The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits: Audio-Technica AT875R, BP4073; DPA 4017; Sennheiser MKH8060; Sony ECM-673, ECM-674, ECM-VG1 Fits other small shotgun microphones 19-22mm in diameter and with slots less than 12cm from end of mic Made in England from high quality acoustic synthetic fur with a porous open cell foam core
£74.40
-
12cm Nimbus Windshield (19/22), Black Fur
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Fits: Audio-Technica AT875R, BP4073; DPA 4017; Schoeps MiniCMIT; Sennheiser MKH8060; Sony ECM-673, ECM-674, ECM-VG1 Fits other small shotgun microphones 19-22mm in diameter and with slots less than 12cm from end of mic Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Made from high quality acoustic syntethic fur with a porous open cell foam core Audio-Technica AT875R, BP4073; DPA 4017; Schoeps MiniCMIT; Sennheiser MKH8060; Sony ECM-673, ECM-674, ECM-VG1
£74.40
-
12cm Shotgun Foam (19/22), Royal Blue Flock
THESE ITEMS ARE B STOCK LIMITED STOCK AVAILABLE Note: These are *NOT* Chroma-Key Blue Features Slip-on foam wind protection Flocked in a beautiful Limited time offer of “Royal Blue (Pantone 287C)” Up to -10dB wind noise reduction Suitable for the following mics: Audio-Technica BP4073, AT875R DPA 4017C. 4017B, 2017 Deity Deity S-Mic 2S, Deity S-Mic 3S Schoeps MiniCMIT Sennheiser MKH 8060
£21.60
-
12cm Shotgun Mic Foam (19/22)
PRICES INCLUDE UK VAT The Radius range of condenser and shotgun microphone foams are made from high-quality acoustic foam designed to prevent plosives, boom swings swooshes and other light wind noise, whilst not interfering with high frequency audio capture. These are not the typical cheap mic foams that turn to dust in your fingers and fade away fast. Radius foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture. For shotgun microphones, the tapered foam is wider in the back to provide more side wind protection around the capsule. The foam narrows toward the front to provide additional protection around the interference tube whilst allowing for maximum transparency. These foams come in 3 internal diameter sizes and a variety of lengths to fit many broadcast, camera and recording microphones. Mic foams protect against plosives, swooshes and light wind noise Fits other short shotgun and camera microphones 19-22mm in diameter, with slots less than 12cm from end of mic Foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture
£18.00
-
15cm Nimbus Windshield (19/22)
PRICES INCLUDE UK VAT The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits: Audio-Technica AT897, BP4029; Neumann KMR 81 i; Rode NTG-1, NTG-2; Sanken CS-1e, CSS-50; Schoeps CMIT 5 U; Sennheiser MKE600 Fits other small shotgun microphones 19-22mm in diameter and with slots less than 15cm from end of mic Made in England from high quality acoustic synthetic fur with a porous open cell foam core
£79.20
-
15cm Nimbus Windshield (19/22), Black Fur
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits: Audio-Technica AT897, BP4029; Neumann KMR 81 i; Rode NTG-1, NTG-2; Sanken CS-1e, CSS-50; Schoeps CMIT 5 U; Sennheiser MKE600 Fits other small shotgun microphones 19-22mm in diameter and with slots less than 15cm from end of mic Made in England from high quality acoustic synthetic fur with a porous open cell foam core
£79.20
-
15cm Shotgun Mic Foam (19/22)
PRICES INCLUDE UK VAT The Radius range of condenser and shotgun microphone foams are made from high-quality acoustic foam designed to prevent plosives, boom swings swooshes and other light wind noise, whilst not interfering with high frequency audio capture. These are not the typical cheap mic foams that turn to dust in your fingers and fade away fast. Radius foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture. For shotgun microphones, the tapered foam is wider in the back to provide more side wind protection around the capsule. The foam narrows toward the front to provide additional protection around the interference tube whilst allowing for maximum transparency. These foams come in 3 internal diameter sizes and a variety of lengths to fit many broadcast, camera and recording microphones. Mic foams protect against plosives, swooshes and light wind noise Fits: Audio-Technica AT897, BP4029; Neumann KMR 81 i; Rode NTG-1, NTG-2; Sanken CS-1e, CSS-50; Sennheiser MKE600; Schoeps CMIT 5 Fits other shotgun microphones 19-22mm in diameter, with slots less than 15cm from end of mic Foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture
£21.00
-
18cm Nimbus Windshield (19/22)
PRICES INCLUDE UK VAT The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits: Rode NTG-3; Sanken CS-3e; Sennheiser ME66 K6, MKH416, MKH418-S; Sony ECM-678, ECM-680S Fits other shotgun microphones 19-22mm in diameter and with slots less than 18cm from end of mic Made in England from high quality acoustic synthetic fur with a porous open cell foam core
£79.20
-
18cm Nimbus Windshield (19/22), Black Fur
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits: Rode NTG-3; Sanken CS-3e; Sennheiser ME66 K6, MKH416, MKH418-S; Sony ECM-678, ECM-680S Fits other shotgun microphones 19-22mm in diameter and with slots less than 18cm from end of mic Made in England from high quality acoustic synthetic fur with a porous open cell foam core
£79.20
-
18cm Nimbus Windshield (24/25)
PRICES INCLUDE UK VAT The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits Sennheiser MKH60 and other shotgun microphones 24-25mm in diameter and with slots less than 18cm from end of mic Made in England from high quality acoustic synthetic fur with a porous open cell foam core
£79.20
-
18cm Nimbus Windshield (24/25), Black Fur
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits Sennheiser MKH60 and other shotgun microphones 24-25mm in diameter and with slots less than 18cm from end of mic Made in England from high quality acoustic synthetic fur with a porous open cell foam core
£79.20
-
18cm Shotgun Mic Foam (19/22)
PRICES INCLUDE UK VAT The Radius range of condenser and shotgun microphone foams are made from high-quality acoustic foam designed to prevent plosives, boom swings swooshes and other light wind noise, whilst not interfering with high frequency audio capture. These are not the typical cheap mic foams that turn to dust in your fingers and fade away fast. Radius foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture. For shotgun microphones, the tapered foam is wider in the back to provide more side wind protection around the capsule. The foam narrows toward the front to provide additional protection around the interference tube whilst allowing for maximum transparency. These foams come in 3 internal diameter sizes and a variety of lengths to fit many broadcast, camera and recording microphones. Mic foams protect against plosives, swooshes and light wind noise Fits other shotgun microphones 19-22mm in diameter, with slots less than 18cm from end of mic Foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture
£21.00
-
1m x 1.5m Grey - Fur Off Cut
UK VAT INCLUDED IN PRICE In an attempt to lower our wastage, we are now selling bags of fur off cuts. Each bag comes with a 1m x 1.5m piece of fur. These would be ideal for cutting up and using for lavalier coverage. These pieces of material may have discoloring, creases of imperfections within them. We are unable to use the material, however, we would hate to see them going to waste. LIMITED STOCK AVAILABLE
£20.00
-
3.5cm Handheld Mic Foam (50mm Børe)
The Radius range of handheld microphone foams are made from high-quality acoustic foam designed to prevent plosives, hand movement swooshes and other very light wind noise, whilst not interfering with high frequency audio capture. These are not the typical cheap mic foams that turn to dust in your fingers and fade away fast. Radius foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture. These foams come in 3 different sizes to fit most sizes of reporter, vocal and other handheld microphones. Compatible with: Audio-Technica AT8004, Rode Reporter, Sennheiser e845, Electro-Voice 635 Mic foams protect against plosives, swooshes and light wind noise Foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture We also stock 3cm & 4cm handheld micsTax included in price
£15.00
-
3cm Handheld Mic Foam (55mm Børe)
The Radius range of handheld microphone foams are made from high-quality acoustic foam designed to prevent plosives, hand movement swooshes and other very light wind noise, whilst not interfering with high frequency audio capture. These are not the typical cheap mic foams that turn to dust in your fingers and fade away fast. Radius foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture. These foams come in 3 different sizes to fit most sizes of reporter, vocal and other handheld microphones. Compatible with: Shure SM57, Shure SM63, Shure VP64 Mic foams protect against plosives, swooshes and light wind noise Foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture Dimensions: 30mm x 55mm Hole We also stock 3.5cm & 4cm handheld micsTax included in price
£15.00
-
4cm Handheld Mic Foam (55mm Børe)
The Radius range of handheld microphone foams are made from high-quality acoustic foam designed to prevent plosives, hand movement swooshes and other very light wind noise, whilst not interfering with high frequency audio capture. These are not the typical cheap mic foams that turn to dust in your fingers and fade away fast. Radius foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture. These foams come in 3 different sizes to fit most sizes of reporter, vocal and other handheld microphones. Compatible with: Electro-Voice RE-50, Neumann KMS 104/105, Sennheiser e835, Shure SM58 Mic foams protect against plosives, swooshes and light wind noise Foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture Dimensions: 40mm x 55mm Hole We also stock 3.5cm & 3cm handheld micsTax included in price
£18.00
-
5cm Mic Foam
PRICES INCLUDE UK VAT The Radius range of condenser and shotgun microphone foams are made from high-quality acoustic foam designed to prevent plosives, boom swings swooshes and other light wind noise, whilst not interfering with high frequency audio capture. These are not the typical cheap mic foams that turn to dust in your fingers and fade away fast. Radius foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture. For shotgun microphones, the tapered foam is wider in the back to provide more side wind protection around the capsule. The foam narrows toward the front to provide additional protection around the interference tube whilst allowing for maximum transparency. These foams come in 3 internal diameter sizes and a variety of lengths to fit many broadcast, camera and recording microphones. Mic foams protect against plosives, swooshes and light wind noise Fits other small pencil condenser and instrument microphones 19-22mm in diameter, with slots less than 5cm from end of mic Foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture
£15.00
-
5cm MKH50 Mushroom Foam & Fur Windcover (24/25)
The Radius MKH50 Mushroom Mic Foam (24/25) is a designed to fit the MKH50 and other 24-25mm diameter microphones when used with a RAD shock mount or other style mount. The mic has a thick circular end around the capsule and a thinner "stem" to provide more grip around the body of the mic. Inside, there is cavity (ø40mm) that creates dead air space around the capsule. We have also added a non-slip silicone to the entrance of each foam, to help prevent the foams from slipping off. Each foam can be found with or without the fur windcover too - giving you that little bit extra wind protection! All our foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture.
£42.00
-
5cm MKH50 Mushroom Mic Foam, 24/25
The Radius MKH50 Mushroom Mic Foam (24/25) is a designed to fit the MKH50 and other 24-25mm diameter microphones when used with a RAD shock mount or other style mount. The mic has a thick circular end around the capsule and a thinner "stem" to provide more grip around the body of the mic. Inside, there is cavity (ø40mm) that creates dead air space around the capsule. We have also added a non-slip silicone to the entrance of each foam, to help prevent the foams from slipping off. Each foam can be found with or without the fur windcover too - giving you that little bit extra wind protection! All our foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture.
£18.00
-
5cm MKH50 Nimbus Windshield (24/25)
PRICES INCLUDE UK VAT The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits: Sennheiser MKH20, MKH30, MKH40, MKH50; Sony ECM-MS2 Fits other small pencil condenser and instrument microphones 24-25mm in diameter, with slots less than 5cm from end of mic and that have standard length preamps Made in England from high quality acoustic synthetic fur with a porous open cell foam core
£67.20
-
5cm MKH50 Nimbus Windshield (24/25), Black Fur
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits: Sennheiser MKH20, MKH30, MKH40, MKH50; Sony ECM-MS2 Fits other small pencil condenser and instrument microphones 24-25mm in diameter, with slots less than 5cm from end of mic and that have standard length preamps Made in England from high quality acoustic synthetic fur with a porous open cell foam core
£67.20
-
5cm Mushroom Foam & Fur Windcover (19/22)
Shaped like an actual mushroom, our newest foam is designed for smaller mics like the DPA Microphones 4018C, Sennheiser MKH 8050 and Schoeps CMC6-41. The idea behind the step down on the foam shape, is to allow it to be pushed close to the front hoop of the shock mount. This also helps to retain the optional fur cover too. Inside, there is cavity (ø40mm) that creates dead air space around the capsule. We have also added a non-slip silicone to the entrance of each foam, to help prevent the foams from slipping off. Each foam can be found with or without the fur windcover too - giving you that little bit extra wind protection! All our foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture.
£42.00
-
5cm Mushroom Mic Foam, 19/22
Shaped like an actual mushroom, our newest foam is designed for smaller mics like the DPA Microphones 4018C, Sennheiser MKH 8050 and Schoeps CMC6-41. The idea behind the step down on the foam shape, is to allow it to be pushed close to the front hoop of the shock mount. This also helps to retain the optional fur cover too. Inside, there is cavity (ø40mm) that creates dead air space around the capsule. We have also added a non-slip silicone to the entrance of each foam, to help prevent the foams from slipping off. Each foam can be found with or without the fur windcover too - giving you that little bit extra wind protection! All our foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture.
£18.00
-
5cm Nimbus Windshield (19/22)
PRICES INCLUDE UK VAT The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits: AKG C451; AudioTechnica AT4022, BP3600; Beyerdynamic MC930, MC950; DPA 4006A, 4011A, 4015A, 4018A; Neumann KM184; Rode NT5, NT55; Schoeps CMC6 + MK4, MK5 or MK41 Fits other small pencil condenser and instrument microphones 19-22mm in diameter, with slots less than 5cm from end of mic and that have standard length preamps (make sure there is enough room behind the capsule and in front of the mic mount to slide Nimbus on) Made in England from high quality acoustic synthetic fur with a porous open cell foam core
£67.20
-
5cm Nimbus Windshield (19/22), Black Fur
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits: AKG C451; AudioTechnica AT4022, BP3600; Beyerdynamic MC930, MC950; DPA 4006A, 4011A, 4015A, 4018A; Neumann KM184; Rode NT5, NT55; Schoeps CMC6 + MK4, MK5 or MK41 Fits other small pencil condenser and instrument microphones 19-22mm in diameter, with slots less than 5cm from end of mic and that have standard length preamps (make sure there is enough room behind the capsule and in front of the mic mount to slide Nimbus on) Made in England from high quality acoustic synthetic fur with a porous open cell foam core
£67.20
-
7cm Sanken CS-M1 Nimbus Windshield (19/22), Black Fur
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Fits: Sanken CS-M1 Fits other small hypercardioid microphones 19-22mm in diameter, with slots less than 7cm from end of mic and that have standard length preamps Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Made from high quality acoustic synthetic fur with a porous open cell foam core
£67.20
-
Anti-Sway Bar for RAD Mount and Mini-ALTO
UK VAT INCLUDED IN PRICE The Anti-Sway Bar for all sizes RAD mounts & Mini-ALTOs acts as a brace across the RAD Hoops. This gives the suspension additional structural support, especially useful for longer/heavier microphones. If using softer hoops, it allows great compliance whilst preventing the suspension from swaying too much. This becomes all the more important when mics are being used in the Mini-ALTO - so the mic does not strike the inside of the basket. Made in the UK
£2.40
-
Audio-Technica BP28 Nimbus Windshield
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each standard Nimbus is made using 25mm length dark grey, acoustic synthetic fur and a porous open cell foam internal core. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Fits: Audio-Technica BP28 Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Made from high quality acoustic synthetic fur with a porous open cell foam core.
£114.00
-
Audio-Technica BP28L Nimbus Windshield
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each standard Nimbus is made using 25mm length dark grey, acoustic synthetic fur and a porous open cell foam internal core. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Fits: Audio-Technica BP28L Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Made from high quality acoustic synthetic fur with a porous open cell foam core
£132.00
-
B STOCK - 12cm Nimbus Windshield (19/22)
THESE ITEMS ARE B STOCK AND HAVE SLIGHT IMPERFECTIONS LIMITED STOCK AVAILABLE The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the only slip-on fur windscreens to incorporate small "pepper pot" hole openings on the end caps to reduce air pressure near the capsule. This unique feature diminishes the “muddy or muffled” sound that can occur at some frequencies and adds extra clarity when recording with certain microphones. Each Nimbus is made using 25mm length dark grey, acoustic synthetic fur and a porous open cell foam internal core. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design adds extra clarity at certain frequencies by reducing air pressure near the microphone capsule Fits: Audio-Technica AT875R, BP4073; DPA 4017; Sennheiser MKH8060; Sony ECM-673, ECM-674, ECM-VG1 Fits other small shotgun microphones 19-22mm in diameter and with slots less than 12cm from end of mic Made in England from high quality acoustic synthetic fur with a porous open cell foam core
£42.00
-
B STOCK - 15cm Nimbus Windshield (19/22)
THIS ITEM IS B STOCK AND HAS SLIGHT IMPERFECTIONS LIMITED STOCK AVAILABLE The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the only slip-on fur windscreens to incorporate small "pepper pot" hole openings on the end caps to reduce air pressure near the capsule. This unique feature diminishes the “muddy or muffled” sound that can occur at some frequencies and adds extra clarity when recording with certain microphones. Each Nimbus is made using 25mm length dark grey, acoustic synthetic fur and a porous open cell foam internal core. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design adds extra clarity at certain frequencies by reducing air pressure near the microphone capsule Fits: Audio-Technica AT897, BP4029; Neumann KMR 81 i; Rode NTG-1, NTG-2; Sanken CS-1e, CSS-50; Schoeps CMIT 5 U; Sennheiser MKE600 Fits other small shotgun microphones 19-22mm in diameter and with slots less than 15cm from end of mic Made in England from high quality acoustic synthetic fur with a porous open cell foam core
£48.00
-
B STOCK - 18cm Nimbus Windshield (19/22)
THESE ITEMS ARE B-STOCK AND HAVE SLIGHT IMPERFECTIONS! LIMITED STOCK AVAILABLE The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the only slip-on fur windscreens to incorporate small "pepper pot" hole openings on the end caps to reduce air pressure near the capsule. This unique feature diminishes the “muddy or muffled” sound that can occur at some frequencies and adds extra clarity when recording with certain microphones. Each Nimbus is made using 25mm length dark grey, acoustic synthetic fur and a porous open cell foam internal core. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design adds extra clarity at certain frequencies by reducing air pressure near the microphone capsule Fits: Rode NTG-3; Sanken CS-3e; Sennheiser ME66 K6, MKH416, MKH418-S; Sony ECM-678, ECM-680S Fits other shotgun microphones 19-22mm in diameter and with slots less than 18cm from end of mic Made in England from high quality acoustic synthetic fur with a porous open cell foam core.
£48.00
-
B STOCK - 5cm Nimbus Windshield (19/22)
THESE ITEMS ARE B STOCK AND HAVE SLIGHT IMPERFECTIONS LIMITED STOCK AVAILABLE The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the only slip-on fur windscreens to incorporate small "pepper pot" hole openings on the end caps to reduce air pressure near the capsule. This unique feature diminishes the “muddy or muffled” sound that can occur at some frequencies and adds extra clarity when recording with certain microphones. Each Nimbus is made using 25mm length dark grey, acoustic synthetic fur and a porous open cell foam internal core. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design adds extra clarity at certain frequencies by reducing air pressure near the microphone capsule Fits: AKG C451; AudioTechnica AT4022, BP3600; Beyerdynamic MC930, MC950; DPA 4006A, 4011A, 4015A, 4018A; Neumann KM184; Rode NT5, NT55; Schoeps CMC6 + MK4, MK5 or MK41 Fits other small pencil condenser and instrument microphones 19-22mm in diameter, with slots less than 5cm from end of mic and that have standard length preamps (make sure there is enough room behind the capsule and in front of the mic mount to slide Nimbus on) Made in England from high quality acoustic synthetic fur with a porous open cell foam core
£36.00
-
B STOCK - 5cm Nimbus Windshield 24/25 - Black MKH50 Edition
THESE ITEMS ARE B STOCK AND HAVE SLIGHT IMPERFECTIONS LIMITED STOCK AVAILABLE The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the only slip-on fur windscreens to incorporate small "pepper pot" hole openings on the end caps to reduce air pressure near the capsule. This unique feature diminishes the “muddy or muffled” sound that can occur at some frequencies and adds extra clarity when recording with certain microphones. Each Nimbus is made using 25mm length dark grey, acoustic synthetic fur and a porous open cell foam internal core. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design adds extra clarity at certain frequencies by reducing air pressure near the microphone capsule Fits other small pencil condenser and instrument microphones 24-25 mm in diameter, with slots less than 5cm from end of mic and that have standard length preamps (make sure there is enough room behind the capsule and in front of the mic mount to slide Nimbus on) Made in England from high quality acoustic synthetic fur with a porous open cell foam core
£36.00
-
B STOCK - Fur Windcover for Cinela Cosi, Black/Grey
THESE ITEMS ARE B-STOCKThese items may have slight imperfections to the fur or sewing, however they are still functionalThe Radius Windcovers are made from a high quality, multi-piled synthetic acoustic fur. Each windcover is lined with a smooth internal lining, that gives additional wind protection. Key Features: Each windcover comes with 2 snap fasteners to seal the windshield in. The windcover slips under the suspension. We offer Fur Windcovers for the Cinela Cosi in a range of sizes: X Large - (Cosi-XL-19) Large - (Cosi-L-19 4017C , Cosi-L-20 CMC, Cosi-L-21 Mini CMIT, Cosi-L-CMS50, Cosi-L-8060, Cosi-L-8060-MZF, Cosi-L-MKH50)Medium - (Cosi-M-19, Cosi-M-22a, Cosi-M-22b) Small - (Cosi-S-19, Cosi-s-CCM)X Small - (Cosi-XS-CMC1U, Cosi-XS-CMC1L, Cosi-XS-19) You can now find more fur wind protection solutions for Cinela, Rode Blimps and Portable recorder/On Camera microphones. If you can't find what you're looking for, please contact us directly for custom orders. We are happy to take requests for different kinds of custom windcovers using different materials, in different colors and with unbranded / your branded labels. Minimum order quantities for customer orders, certain materials and sizes may be applicable. Disclaimer: This item is not intended to replace the fitted fur supplied to the COSI, but instead for extra protection in extreme high wind conditions. When using multiple layers of fur, it may impact the HF performance and handling noise of the COSI’s suspension. Variants of this product are sold for use with products manufactured by: Sennheiser Electronic Gmbh & Co, Shure Inc. Røde Microphones, Rycote Microphone Windshields Ltd, Cinela, DPA Microphones. Any reference to the products name, design and/or trademark is only intended to identify compatibility. Radius windshields is not sponsored by, connected to or affiliated with and share no interest, including any licence, with the aforementioned companies/corporations.
£48.00
-
B STOCK - Replacement Fur Wind Covers for Cinela Windshield Blimps
THESE ITEMS ARE B STOCK AND HAVE SLIGHT IMPERFECTIONS LIMITED STOCK AVAILABLE The Radius windcovers are made from our high-quality longer-haired synthetic acoustic fur and come with a smooth internal lining and draw string. The windcovers come in a range of standard sizes to specifically fit a variety of brands' windshield blimps as replacement windcovers. We are happy to take requests for different kinds of custom windcovers using different materials, in different colors and with unbranded / your branded labels. Minimum order quantities for customer orders, certain materials and sizes may be applicable.
£48.00
-
B STOCK - Replacement Fur Wind Covers for Rycote Windshield Blimps
THESE ITEMS ARE B STOCK OR SAMPLES WITH SLIGHT IMPERFECTIONS LIMITED STOCK AVAILABLE The Radius windcovers are made from our high-quality longer-haired synthetic acoustic fur and come with a smooth internal lining and draw string. The windcovers come in a range of standard sizes to specifically fit a variety of brands' windshield blimps as replacement windcovers. We are happy to take requests for different kinds of custom windcovers using different materials, in different colors and with unbranded / your branded labels. Minimum order quantities for customer orders, certain materials and sizes may be applicable.
£48.00
-
Brass Mic Stand Adaptor, 5/8-F to 3/8-M
This brass mic stand adaptor allows you to convert a 5/8 thread microphone stand or arm into a 3/8 thread for RAD mounts and other audio accessories. It has 3/8"-16 Male to 5/8"-27 Female threads. The adaptor is made in the U.K. and CNC machined from solid brass.
£8.00
-
Cable Techniques 10" Low-Profile XLR-3 Cable
10" (inch) Low-Profile XLR-3F to XLR-3M Adjustable Angle Low-Profile XLR 3-pin cable. The XLR side-exit cable outlet orientation is user adjustable from 30° to 150° and 210° to 330° from the release button allowing for perfect integration into any location audio kit. The cable diameter is a slim 3.2mm yet extremely durable with an ultra-flexible PUR Polyurethane Jacket material that is crush resistant, tear-resistant and cold-resistant. Perfect for Lectrosonics UCR type receivers into XLR inputs of field gear like Sound Devices 633, 688, 788T, 302, 552, Zaxcom, Zoom and many others. The 10" length is great for the first two channels of the mixer to reduce cable slack. Our Lo-Pro cables are up to 40% lighter than standard XLR cables while significantly reducing the profile of anything they are plugged into. We use premium quality slim cable that is crush resistant, tear-resistant, cold-resistant and easy to wind.
£48.00
-
Cable Techniques 18" Low-Profile XLR-3 Cable
18" (inch) Low-Profile XLR-3F to XLR-3M Adjustable Angle Low-Profile XLR 3-pin cable. The XLR side-exit cable outlet orientation is user adjustable from 30° to 150° and 210° to 330° from the release button allowing for perfect integration into any location audio kit. The cable diameter is a slim 3.2mm yet extremely durable with an ultra-flexible PUR Polyurethane Jacket material that is crush resistant, tear-resistant and cold-resistant. Perfect for Lectrosonics UCR type receivers into XLR inputs of field gear like Sound Devices 633, 688, 788T, 302, 552, Zaxcom, Zoom and many others. Our Lo-Pro cables are up to 40% lighter than standard XLR cables while significantly reducing the profile of anything they are plugged into. We use premium quality slim cable that is crush resistant, tear-resistant, cold-resistant and easy to wind.
£48.00
-
Cable Techniques 18" LPS Low-Profile TA3F to TA3F cable
18" (inch) LPS Low-Profile TA3F to TA3F cable. Perfect for Lectrosonics SR Receivers with SREXT bottom or SRBATTSLED into Sound Devices 633, 688, 664 [CL-6], 788T TA3M Line inputs and other compatible gear. Using the same concept as our LoPro XLR connectors, mini set-screws lock down the colour cap securely and allow for degree of outlet adjustment. The outlet can be set to either Left or Right of the release pin for maximum flexibility. Our Lo-Pro cables significantly reduce the profile of interconnect panels. The cable diameter is a slim 2.7mm yet extremely durable with an ultra-flexible PUR Polyurethane Jacket material that is crush resistant, tear-resistant and cold-resistant. The 12" length is great for the first two channels of the mixer to reduce cable slack.
£48.00
-
Cable Techniques 18” XLR-3 Premium Coiled “Boom to Mixer” Cable
18” (inch) Low-Profile XLR 3-pin Premium Coiled “Boom pole to Mixer” cable with Lo-Pro connectors, extends to 6'. Perfect for XLR inputs of field gear like Sound Devices 633, 688, 788T, 302, 552, Zaxcom, Zoom and many others.The cable jacket diameter is a slim 3.4mm yet extremely durable. The XLR side-exit cable outlet is user adjustable allowing for perfect integration any into location audio bag. Reduce the load: Our Lo-Pro cables are up to 40% lighter than standard XLR cables while significantly reducing the profile of anything they are plugged into.Interchangeable XLR Color Caps can be ordered separately to customize your color profile at any time. Choose from: Black, Red, Blue, Green, Yellow, Orange, White, Gray, Purple and Brown. Our Lo-Profile connectors are manufactured with the highest quality standards and are fully repairable with ease in the field.
£78.00
-
Cable Techniques 24" Low-Profile XLR-3 Cable
24" (inch) Low-Profile XLR-3F to XLR-3M Adjustable Angle XLR 3-pin cable. The XLR side-exit cable outlet orientation is user adjustable from 30° to 150° and 210° to 330° from the release button allowing for perfect integration into any location audio kit. The cable diameter is a slim 3.2mm yet extremely durable with an ultra-flexible PUR Polyurethane Jacket material that is crush resistant, tear-resistant and cold-resistant. Perfect for Lectrosonics UCR type receivers into XLR inputs of field gear like Sound Devices 633, 688, 788T, 302, 552, Zaxcom, Zoom and many others. Our Lo-Pro cables are up to 40% lighter than standard XLR cables while significantly reducing the profile of anything they are plugged into. We use premium quality slim cable that is crush resistant, tear-resistant, cold-resistant and easy to wind.
£50.40
-
Cable Techniques 6” XLR-3 Low-Profile Coiled Jumper cable
6” (inch) XLR-3 Mini Coiled Jumper cable, extends to approx 12-15". Perfect for Microphones and other gear into XLR inputs of cameras and field gear like Sound Devices 633, 688, 788T, 302, 552, Zaxcom, Zoom and many others.The XLR side-exit cable outlet is user adjustable allowing for perfect integration any into location audio bag. Reduce the load: Our Lo-Pro cables are up to 40% lighter than standard XLR cables while significantly reducing the profile of anything they are plugged into.Interchangeable XLR Color Caps can be ordered separately to customize your color profile at any time. Choose from: Black, Red, Blue, Green, Yellow, Orange, White, Gray, Purple and Brown. Our Lo-Profile connectors are manufactured with the highest quality standards and are fully repairable with ease in the field.
£48.00
-
Cable Techniques Color Cap SET for LPS Low-Profile TA Connectors
Dual set of all 10 color caps for LPS Low-Profile right angle TA "Mini XLR" and CT-LPS-T35 3.5mm TRS Connectors. Customize your color profile at any time. Set includes (2) each Black, Red, Blue, Green, Yellow, Orange, White, Gray, Purple and Brown. Standard cap accepts cable diameters up to 3.2mm. Injection moulded in rock-solid durable ABS thermoplastic to assure maximum impact resistance and toughness. Compatible with all Cable Techniques LPS Series 3-pin, 4-pin and 5-pin TA "Mini XLR" and CT-LPS-T35 3.5mm TRS connector types.
£24.00
