New Arrivals

The Mini-ALTO Cable Clip with Strap, retro fits to the Mini-ALTO smiley face adaptor and allows cable to be secured to provide better handling noise against cable-borne noise. The cable clip simply twists and locks onto the small car between the middle & rear RAD hoop positions on the smiley face. The Cable Clip has been designed to secure cables from ø2.1mm to ø6.0mm in diameter.Smiley Face Bracket is not included. 

Read more less

This low profile 5-Pin XLR stereo jumper cable is made to fit Mini-ALTO windshield kits and RAD shock mounts. The cable itself is 260mm long and has a 90-degree female XLR connection and straight male XLR connection. The cable length and width are designed to fit in the RAD shock mount cable footings with additional slack for strain relief and repositioning of microphones. The cable also comes fitted with a "blue cable hole plug" for using with a Mini-ALTO. 

Read more less

This low profile thin 3-Pin XLR jumper cable is made to fit Mini-ALTO windshield kits. The cable itself is 260mm long and has a 90-degree female XLR connection and straight male XLR connection. It is made using 2.1mm Mogami cable and Neutrik connectors. The cable also comes fitted with a "blue cable hole plug" for using with a Mini-ALTO.  The size and length of this cable is designed for primarily using with a Mini-ALTO or RAD Mount with boom mount connection. If using with a RAD Pistol Grip handle, a longer version of this cable is recommended.

Read more less

UK VAT INCLUDED IN PRICEThe Røde Blimp RAD Hoop adaptor simply allows any Radius RAD Hoop to be fitted onto the Røde Mk2 Blimp. Remove & retain the screw holding the Lyre on the Blimp suspension, fit the adaptor & then RAD hoop - retighten with the original Rode screw.For the FREE Downloadable 3D printer files, please contact hello@radiuswindshields.com. Made in the UK

Read more less

PRICE INCLUDES UK VAT The RAD Mount Anti-Friction Washer is a simple upgrade designed to make positioning and adjusting your RAD mount, without the need of fully undoing the pivot knob. Fitted between the RAD mount bracket & the boom adaptor or handle, it reduces the resistance caused by the locking teeth, allowing smoother movement and more precise angle adjustments. Manufactured from the same durable TPE soft material used throughout the Radius range, the anti-friction washer integrates seamlessly with existing RAD mounts and Mini-ALTO kits. Its low-profile design maintains the strength and reliability of the mounting system while adding a subtle Radius blue accent.

Read more less

Mini-ALTO Stereo Y-cable uses Low-Profile right angle XLR 5-pin Female to Straight XLR 5-pin Male ø2.85mm cables. Perfect for use in the Mini-ALTO windshield series with MS pairs, such as the Sennheiser MKH 8018. The cables length are 400mm, and therefore designed to be used with the Mini-ALTO in a pistol grip handle configuration. The cable also have a cable plug designed to fit into the cable exit of the Mini-ALTO smiley face, made from an ultra-soft TPE material - for creating a seal around the cable exiting the basket. The cable diameter is a slim 2.85mm yet extremely durable with an ultra-flexible PUR Polyurethane Jacket material that is crush resistant, tear-resistant and cold-resistant.

Read more less

UK VAT INCLUDED IN PRICE This soft-touch extension handle is designed to provide a secure and comfortable grip while extending your mounting options. It features a 3/8" male Whitworth BSW thread on one end and a 3/8" female UNC thread on the other, allowing straightforward integration into standard professional audio setups. Fully compatible with RAD-1 & RAD-2 and any mounts with female 3/8” thread, the handle offers reliable mechanical connection for shock-mount applications. It is also frequently paired with portable recorders, making it a practical choice for handheld recording configurations where improved handling and thread adaptability are required. SpecificationDimensions (Net)        W 32.0 x H 32.0 x L 122.0mmWeight (Net)                57 gramsMade in the UK

Read more less

PRICE INCLUDES UK VATMini-ALTO Stereo Y-cable uses Low-Profile right angle Lemo FVN connectors to (2) Straight XLR 5-pin Male ”Y” Mogami W3031 ø2.8mm cables. Perfect for use in the Mini-ALTO windshield series with MS pairs, such as the Sennheiser MKH 8030/8040 or Schoeps CCM-41/Mk8. The cables length are 275mm, and therefore designed to be used with the Mini-ALTO in a boom adaptor configuration. The Y-cable also have a cable plug designed to fit into the cable exit of the Mini-ALTO smiley face, made from an ultra-soft TPE material - for creating a seal around the cable exiting the basket. The cable diameters are a slim 2.8mm yet extremely durable with an ultra-flexible PUR Polyurethane Jacket material that is crush resistant, tear-resistant and cold-resistant.

Read more less

PRICE INCLUDES UK VAT Mini-ALTO Stereo Y-cable uses Low-Profile right angle XLR 3-pin Female to (2) Straight XLR 5-pin Male ”Y” Mogami W2901 ø2.1mm cables. Perfect for use in the Mini-ALTO windshield series with MS pairs, such as the Sennheiser MKH 8030/8040 or Schoeps CMC6-41/Mk8. The cables length are 260mm, and therefore designed to be used with the Mini-ALTO in a boom adaptor configuration. The Y-cable also have a cable plug designed to fit into the cable exit of the Mini-ALTO smiley face, made from an ultra-soft TPE material - for creating a seal around the cable exiting the basket. The cable diameters are a slim 2.1mm yet extremely durable with an ultra-flexible PUR Polyurethane Jacket material that is crush resistant, tear-resistant and cold-resistant.

Read more less

PRICE INCLUDES UK VAT Mini-ALTO Stereo Y-cable uses Low-Profile right angle XLR 3-pin Female to (2) Straight XLR 5-pin Male ”Y” Mogami W2901 ø2.1mm cables. Perfect for use in the Mini-ALTO windshield series with MS pairs, such as the Schoeps CMC6-41/Mk8. The cables length are 400mm, and therefore designed to be used with the Mini-ALTO in a pistol grip handle configuration. The Y-cable also have a cable plug designed to fit into the cable exit of the Mini-ALTO smiley face, made from an ultra-soft TPE material - for creating a seal around the cable exiting the basket. The cable diameters are a slim 2.1mm yet extremely durable with an ultra-flexible PUR Polyurethane Jacket material that is crush resistant, tear-resistant and cold-resistant.

Read more less

The Mini-ALTO & RAD-2 Kit is a compact and versatile microphone windshield and shock mounting system for location sound professionals. It features the award winning RAD shock mount for exceptional isolation from handling noise, an ultra-lightweight 2-part magnetic "pod" windshield that can be fitted/unfitted in seconds and a removable fur cover for added wind protection. The Mini-ALTO 410 size windshield kits come in full kits which include the windshield, a RAD-2 Mount, spare hoops with different suspension firmness, a fur windcover, a "smiley face" adaptor, pistol grip handle and a magnetic stowage holder for the windshield with a caribiner clip. If you already have a RAD-2 Shock Mount, there is an 410 size Add-On Kit available which has the parts needed to convert a RAD mount into a full coverage Mini-ALTO windshield. Fits: Audio-Technica BP28, BP4071; Neumann KMR82; Sennheiser MKH70; Shure VP89M Achieves up to 40dB of wind noise reduction when using on the Mini-ALTO windshield - equivalent to many larger sized windshields "Dome Foam" inserts are included on the inside end of the windshield pod to prevent long shotgun microphones from inadvertently making noise whilst moving around  Shock mount & MA410 Windshield Pods: 308g MA480 Fur Windcover: 143g Combined: 451g Made in the U.K.

Read more less

PRICE INCLUDES UK VAT Mini-ALTO Stereo Y-cable uses Low-Profile right angle XLR 5-pin Female to Straight XLR 5-pin Male ø2.85mm cables. Perfect for use in the Mini-ALTO windshield series with MS pairs, such as the Sennheiser MKH 8018. The cables length are 260mm, and therefore designed to be used with the Mini-ALTO in a boom adaptor configuration. The cable also have a cable plug designed to fit into the cable exit of the Mini-ALTO smiley face, made from an ultra-soft TPE material - for creating a seal around the cable exiting the basket. The cable diameter is a slim 2.85mm yet extremely durable with an ultra-flexible PUR Polyurethane Jacket material that is crush resistant, tear-resistant and cold-resistant.

Read more less

Mini-ALTO cable uses Low-Profile right angle XLR 3-pin Female to Straight XLR 3-pin Male, using Mogami W2901 ø2.1mm cable. Perfect for use in the Mini-ALTO windshield series with mono mics. The cable length are 260mm, and therefore designed to be used with the Mini-ALTO in a boom adaptor configuration. The cable also have a cable plug designed to fit into the cable exit of the Mini-ALTO smiley face, made from an ultra-soft TPE material - for creating a seal around the cable exiting the basket. The cable diameter is a slim 2.1mm yet extremely durable with an ultra-flexible PUR Polyurethane Jacket material that is crush resistant, tear-resistant and cold-resistant.

Read more less

The Mini-ALTO & RAD-2 Kit is a compact and versatile microphone windshield and shock mounting system for location sound professionals. It features the award winning RAD shock mount for exceptional isolation from handling noise, an ultra-lightweight 2-part magnetic "pod" windshield that can be fitted/unfitted in seconds and a removable fur cover for added wind protection. The Mini-ALTO 480 size windshield kits come in full kits which include the windshield, a RAD-2 Mount, spare hoops with different suspension firmness, a fur windcover, a "smiley face" adaptor, pistol grip handle and a magnetic stowage holder for the windshield with a caribiner clip. If you already have a RAD-2 Shock Mount, there is an 480 size Add-On Kit available which has the parts needed to convert a RAD mount into a full coverage Mini-ALTO windshield. Fits: Audio-Technica AT8015; Sennheiser MKH8070; Shure VP89L Achieves up to 40dB of wind noise reduction when using on the Mini-ALTO windshield - equivalent to many larger sized windshields "Dome Foam" inserts are included on the inside end of the windshield pod to prevent long shotgun microphones from inadvertently making noise whilst moving around Shock mount & MA480 Windshield Pods: 323g MA480 Fur Windcover: 171g Combined: 494g Made in the U.K.

Read more less

PRICE INCLUDES UK VATReplacement external locking straps for Mini-ALTO windshield kits Straps fit on sides of the Mini-ALTO as an extra safety measure to keep magnetic pods from separating. Each pack contains 10 Locking Straps. Made in the U.K. 

Read more less