All Cables

Pack of 10 Radius brand "light blue" or "Black" cable straps made from high quality TPE silicone-based polymer that is latex free. The cable straps are designed to replace noisy or scratchy hook & loop straps. Perfect for:  Cable Management Organization with Wires/cords Attaching to Boom Poles Attaching to Shock Mounts General cable organisation.  The straps have a "cable-stay" side which locks the strap into place on the cable so it doesn't fall off. Each pack contains 10 cable straps: 5 x straps that are 60mm long 5 x straps that are 100mm long.  Choose between Black or Light Blue. These cable straps are MADE IN THE U.K.

Read more less

This low profile 3-Pin XLR jumper cable is made to fit all RAD shock mounts. The cable itself is 275mm long and has a 90-degree female XLR connection and straight male XLR connection. The cable length and width are designed to fit in the RAD shock mount cable footings with additional slack for strain relief and repositioning of microphones.

Read more less

The RAD-2 Shock Mounts are designed for for use with standard length shotgun microphones and small condenser pencil microphones with slide-on fur windshields on the front. It provides exceptional isolation from movement, handling noise and other vibrations associated with booming. The mount has soft-coated universal mic clips to fit any mic 19-25mm in diameter. Each mount includes a pair of standard firmness hoops (black), a pair of softer hoops (light blue) and a pair of extra firm hoops (dark blue). The RAD-2 hoops are slightly thicker than RAD-1 hoops and have an extra 3mm of bracing on top to hold the extra weight of front-heavy microphones. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Great microphone shock mount isolation when booming indoors, outdoors or on run-&-gun shoots Recommended for use with shotgun microphones with a diameter of 19-25mm, up to 250mm in length. Can be used indoors and outdoors with or without slide-on windshields. Fits Sennheiser MKH416, Sennheiser MKH8060, Sennheiser MKE600, Schoeps CMIT 5, Schoeps SuperCMIT, Schoeps MiniCMIT, Sanken CS-3, Rode NTG-3, DPA 2017, DPA 4017 and other shotgun microphones Also use the RAD-2 with super-cardioid, cardioid and omni condenser mics when using a slide-on Radius Nimbus Windshield or other style deadcat fur on the front. Comes with 360-degree rotatable XLR holder and 3 pairs of interchangeable RAD-2 hoops included - standard firmness (black), soft firmness (light blue) and extra firm (dark blue) 3-Pin XLR jumper cable included

Read more less

18” (inch) Low-Profile XLR 3-pin Premium Coiled “Boom pole to Mixer” cable with Lo-Pro connectors, extends to 6'. Perfect for XLR inputs of field gear like Sound Devices 633, 688, 788T, 302, 552, Zaxcom, Zoom and many others.The cable jacket diameter is a slim 3.4mm yet extremely durable. The XLR side-exit cable outlet is user adjustable allowing for perfect integration any into location audio bag. Reduce the load: Our Lo-Pro cables are up to 40% lighter than standard XLR cables while significantly reducing the profile of anything they are plugged into.Interchangeable XLR Color Caps can be ordered separately to customize your color profile at any time. Choose from: Black, Red, Blue, Green, Yellow, Orange, White, Gray, Purple and Brown. Our Lo-Profile connectors are manufactured with the highest quality standards and are fully repairable with ease in the field.

Read more less

The RAD-1 Shock Mount, MKH50 Edition comes in an all black & grey matte finish with no blue colour on the hoops or mic clips. They are designed to be used with a Sennheiser MKH50. This suspension provides exceptional isolation from movement, low-end handling noise and other vibrations associated with booming.  The mount has uncoated square MKH mic clips (in black colour) to fit square body mics. Each mount includes a pair of standard firmness hoops (black) and a pair of softer hoops (dark grey) -- so you can get the best isolation for your style of booming. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Great isolation to remove low-end handling noise when booming with an MKH50 in an all matte black & grey colour.  Comes fitted with MKH clips designed to fit square body microphones Fits Sennheiser MKH50 Comes with 360-degree rotatable XLR holder and 2 pairs of interchangeable RAD-1 hoops included - standard firmness (black) and soft firmness (dark grey) 3-Pin XLR cable included

Read more less

The Mini-ALTO Cable Clip with Strap, retro fits to the Mini-ALTO smiley face adaptor and allows cable to be secured to provide better handling noise against cable-borne noise. The cable clip simply twists and locks onto the small car between the middle & rear RAD hoop positions on the smiley face. The Cable Clip has been designed to secure cables from ø2.1mm to ø6.0mm in diameter.Smiley Face Bracket is not included. 

Read more less

This low profile 5-Pin XLR stereo jumper cable is made to fit Mini-ALTO windshield kits and RAD shock mounts. The cable itself is 260mm long and has a 90-degree female XLR connection and straight male XLR connection. The cable length and width are designed to fit in the RAD shock mount cable footings with additional slack for strain relief and repositioning of microphones. The cable also comes fitted with a "blue cable hole plug" for using with a Mini-ALTO. 

Read more less

6” (inch) XLR-3 Mini Coiled Jumper cable, extends to approx 12-15". Perfect for Microphones and other gear into XLR inputs of cameras and field gear like Sound Devices 633, 688, 788T, 302, 552, Zaxcom, Zoom and many others.The XLR side-exit cable outlet is user adjustable allowing for perfect integration any into location audio bag. Reduce the load: Our Lo-Pro cables are up to 40% lighter than standard XLR cables while significantly reducing the profile of anything they are plugged into.Interchangeable XLR Color Caps can be ordered separately to customize your color profile at any time. Choose from: Black, Red, Blue, Green, Yellow, Orange, White, Gray, Purple and Brown. Our Lo-Profile connectors are manufactured with the highest quality standards and are fully repairable with ease in the field.

Read more less

10" (inch) Low-Profile XLR-3F to XLR-3M Adjustable Angle Low-Profile XLR 3-pin cable. The XLR side-exit cable outlet orientation is user adjustable from 30° to 150° and 210° to 330° from the release button allowing for perfect integration into any location audio kit. The cable diameter is a slim 3.2mm yet extremely durable with an ultra-flexible PUR Polyurethane Jacket material that is crush resistant, tear-resistant and cold-resistant. Perfect for Lectrosonics UCR type receivers into XLR inputs of field gear like Sound Devices 633, 688, 788T, 302, 552, Zaxcom, Zoom and many others. The 10" length is great for the first two channels of the mixer to reduce cable slack. Our Lo-Pro cables are up to 40% lighter than standard XLR cables while significantly reducing the profile of anything they are plugged into. We use premium quality slim cable that is crush resistant, tear-resistant, cold-resistant and easy to wind.

Read more less

This RAD-1 Shock Mount comes with a low profile 3-Pin XLR jumper cable included. The RAD-1 Shock Mounts are designed to be used with short shotgun and small condenser pencil microphones (super-cardioid, cardioid and omni). This suspension provides exceptional isolation from movement, handling noise and other vibrations associated with booming. The mount has soft-coated universal mic clips to fit any mic 19-25mm in diameter. Each mount includes a pair of standard firmness hoops (black) and a pair of softer hoops (light blue) -- so you can get the best isolation for your style of booming. The base of this mount comes with a 360-degree rotatable XLR holder and 3/8 thread to use on boom poles, stands or with quick-connect attachments. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory. The RAD Shock Mounts are made in England. Our highest level of microphone shock mount isolation for small, sensitive microphones Recommended for use with short shotgun, omni, cardioid and super-cardioid pencil mics with a diameter of 19-25mm, up to 150mm in length Fits Schoeps CCM & CMC Series, Sennheiser MKH50, Sennheiser MKH8020, Sennheiser MKH8040, Sennheiser MKH8050, DPA 4018, Neumann KM 100 and other small pencil condenser microphones Suitable primarily for indoor use or outdoors with no winds when using the mic by itself or the mic with only a foam windscreen 2 pairs of interchangeable RAD-1 hoops are included - standard firmness (black) and soft firmness (light blue) Comes with 360-degree rotatable XLR holder and XLR jumper cable

Read more less

This low profile thin 3-Pin XLR jumper cable is made to fit Mini-ALTO windshield kits. The cable itself is 260mm long and has a 90-degree female XLR connection and straight male XLR connection. It is made using 2.1mm Mogami cable and Neutrik connectors. The cable also comes fitted with a "blue cable hole plug" for using with a Mini-ALTO.  The size and length of this cable is designed for primarily using with a Mini-ALTO or RAD Mount with boom mount connection. If using with a RAD Pistol Grip handle, a longer version of this cable is recommended.

Read more less

The RAD-3 Shock Mounts are designed for for use with standard length shotgun microphones and small condenser pencil microphones with slide-on fur windshields on the front. The RAD-3 mounts provide the same isolation and support as the RAD-2, but come with a pistol grip handle instead of a boom adaptor. It provides exceptional isolation from movement, handling noise and other vibrations associated with booming. The mount has soft-coated universal mic clips to fit any mic 19-25mm in diameter. Each mount includes a pair of standard firmness hoops (black), a pair of softer hoops (light blue) and a pair of extra firm hoops (dark blue). The RAD-3 hoops are slightly thicker than RAD-1 hoops and have an extra 3mm of bracing on top to hold the extra weight of front-heavy microphones. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Great microphone shock mount isolation when booming indoors, outdoors or on run-&-gun shoots Recommended for use with shotgun microphones with a diameter of 19-25mm, up to 250mm in length. Can be used indoors and outdoors with or without slide-on windshields. Fits Sennheiser MKH416, Sennheiser MKH8060, Sennheiser MKE600, Schoeps CMIT 5, Schoeps SuperCMIT, Schoeps MiniCMIT, Sanken CS-3, Rode NTG-3, DPA 2017, DPA 4017 and other shotgun microphones Also use the RAD-2 with super-cardioid, cardioid and omni condenser mics when using a slide-on Radius Nimbus Windshield or other style deadcat fur on the front. Comes with a pistol grip handle and embedded XLR holder instead of a boom adaptor. The handle has a 3/8 threaded bottom so it can also be attached to boom poles and stands. Also comes with 3 pairs of interchangeable RAD-2 hoops included - standard firmness (black), soft firmness (light blue) and extra firm (dark blue). 3-Pin XLR jumper cable included

Read more less

18" (inch) Low-Profile XLR-3F to XLR-3M Adjustable Angle Low-Profile XLR 3-pin cable. The XLR side-exit cable outlet orientation is user adjustable from 30° to 150° and 210° to 330° from the release button allowing for perfect integration into any location audio kit. The cable diameter is a slim 3.2mm yet extremely durable with an ultra-flexible PUR Polyurethane Jacket material that is crush resistant, tear-resistant and cold-resistant. Perfect for Lectrosonics UCR type receivers into XLR inputs of field gear like Sound Devices 633, 688, 788T, 302, 552, Zaxcom, Zoom and many others. Our Lo-Pro cables are up to 40% lighter than standard XLR cables while significantly reducing the profile of anything they are plugged into. We use premium quality slim cable that is crush resistant, tear-resistant, cold-resistant and easy to wind.

Read more less

The RAD-2 Shock Mount, Dark Edition comes in an all black & grey matte finish with no blue colour on the hoops or mic clips. They are designed for for use with standard length shotgun microphones and small condenser pencil microphones with slide-on fur windshields on the front. It provides exceptional isolation from movement, handling noise and other vibrations associated with booming. The mount has soft-coated universal mic clips to fit any mic 19-25mm in diameter. Each mount includes a pair of standard firmness hoops (black), a pair of softer hoops (dark grey) and a pair of extra firm hoops (dark blue). The RAD-2 hoops are slightly thicker than RAD-1 hoops and have an extra 3mm of bracing on top to hold the extra weight of front-heavy microphones. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Recommended for use with shotgun microphones with a diameter of 19-25mm, up to 250mm in length. Can be used indoors and outdoors with or without slide-on windshields. Comes with 360-degree rotatable XLR holder and 3 pairs of interchangeable RAD-2 hoops included - standard firmness (black), soft firmness (dark grey) and extra firm (dark blue) Fits Sennheiser MKH416, Sennheiser MKH8060, Sennheiser MKE600, Schoeps CMIT 5, Schoeps SuperCMIT, Schoeps MiniCMIT, Sanken CS-3, Rode NTG-3, DPA 2017, DPA 4017 and other shotgun microphones 3-Pin XLR cable included

Read more less

The RAD-1 Shock Mounts, Dark Edition comes in an all black & grey matte finish with no blue colour on the hoops or mic clips. They are designed to be used with short shotgun and small condenser pencil microphones (super-cardioid, cardioid and omni). This suspension provides exceptional isolation from movement, handling noise and other vibrations associated with booming. The mount has soft-coated universal mic clips (in dark grey colour) to fit any mic 19-25mm in diameter. Each mount includes a pair of standard firmness hoops (black) and a pair of softer hoops (dark grey) -- so you can get the best isolation for your style of booming. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Our highest level of microphone shock mount isolation in an all matte black & grey colour Suitable to cardioid & super-cardioid pencil mics with a diameter of 19-25mm, up to 150mm in length Fits Schoeps CCM & CMC Series, Sennheiser MKH50, Sennheiser MKH8020, Sennheiser MKH8040, Sennheiser MKH8050, DPA 4018, Neumann KM 100 and other small pencil condenser microphones Suitable primarily for indoor use or outdoors with no winds when using the mic by itself or the mic with only a foam windscreen Comes with 360-degree rotatable XLR holder and 2 pairs of interchangeable RAD-1 hoops included - standard firmness (black) and soft firmness (dark grey) 3-Pin XLR cable included

Read more less

Dual Set of LoPro color caps for CT-LPXLR Low-Profile right angle XLR Connectors. Interchangeable Cap colors to customize your color profile at any time. Set includes (2) each Black, Red, Blue, Green, Yellow, Orange, White, Gray, Purple and Brown. Injection moulded in rock-solid durable ABS thermoplastic to assure maximum impact resistance and toughness. Compatible with all Cable Techniques Low-Profile right angle XLR connectors. Standard cap accepts cable diameters up to 3.4mm.

Read more less

PRICE INCLUDES UK VAT Mini-ALTO Stereo Y-cable uses Low-Profile right angle XLR 3-pin Female to (2) Straight XLR 5-pin Male ”Y” Mogami W2901 ø2.1mm cables. Perfect for use in the Mini-ALTO windshield series with MS pairs, such as the Schoeps CMC6-41/Mk8. The cables length are 400mm, and therefore designed to be used with the Mini-ALTO in a pistol grip handle configuration. The Y-cable also have a cable plug designed to fit into the cable exit of the Mini-ALTO smiley face, made from an ultra-soft TPE material - for creating a seal around the cable exiting the basket. The cable diameters are a slim 2.1mm yet extremely durable with an ultra-flexible PUR Polyurethane Jacket material that is crush resistant, tear-resistant and cold-resistant.

Read more less

Mini-ALTO Stereo Y-cable uses Low-Profile right angle XLR 5-pin Female to Straight XLR 5-pin Male ø2.85mm cables. Perfect for use in the Mini-ALTO windshield series with MS pairs, such as the Sennheiser MKH 8018. The cables length are 400mm, and therefore designed to be used with the Mini-ALTO in a pistol grip handle configuration. The cable also have a cable plug designed to fit into the cable exit of the Mini-ALTO smiley face, made from an ultra-soft TPE material - for creating a seal around the cable exiting the basket. The cable diameter is a slim 2.85mm yet extremely durable with an ultra-flexible PUR Polyurethane Jacket material that is crush resistant, tear-resistant and cold-resistant.

Read more less

A Lemo-to-XLR Cable designed to fit with the RAD-1 Shock Mount for Schoeps CCM, CMC1-L and CMC1-K microphones/Users/megan/Downloads/RAD-01442 RAD-1 Sock Mount, CCM-CMC Edition w LEMO-XLR Cable Image4.jpg Length: 200mm length Fits with Schoeps CCM, CMC1-L and CMC1-K

Read more less

Pack of 10 Radius brand "light blue" cable straps made from high quality TPE silicone-based polymer that is latex free. The cable straps are designed to replace noisy or scratchy hook & loop straps. The straps have a "cable-stay" side which locks the strap into place on the cable so it doesn't fall off. Each pack contains 10 cable straps: 5 x straps that are 60mm long 5 x straps that are 100mm long.  These cable straps are MADE IN THE U.K.

Read more less

PRICE INCLUDES UK VATMini-ALTO Stereo Y-cable uses Low-Profile right angle Lemo FVN connectors to (2) Straight XLR 5-pin Male ”Y” Mogami W3031 ø2.8mm cables. Perfect for use in the Mini-ALTO windshield series with MS pairs, such as the Sennheiser MKH 8030/8040 or Schoeps CCM-41/Mk8. The cables length are 275mm, and therefore designed to be used with the Mini-ALTO in a boom adaptor configuration. The Y-cable also have a cable plug designed to fit into the cable exit of the Mini-ALTO smiley face, made from an ultra-soft TPE material - for creating a seal around the cable exiting the basket. The cable diameters are a slim 2.8mm yet extremely durable with an ultra-flexible PUR Polyurethane Jacket material that is crush resistant, tear-resistant and cold-resistant.

Read more less

PRICE INCLUDES UK VAT Mini-ALTO Stereo Y-cable uses Low-Profile right angle XLR 3-pin Female to (2) Straight XLR 5-pin Male ”Y” Mogami W2901 ø2.1mm cables. Perfect for use in the Mini-ALTO windshield series with MS pairs, such as the Sennheiser MKH 8030/8040 or Schoeps CMC6-41/Mk8. The cables length are 260mm, and therefore designed to be used with the Mini-ALTO in a boom adaptor configuration. The Y-cable also have a cable plug designed to fit into the cable exit of the Mini-ALTO smiley face, made from an ultra-soft TPE material - for creating a seal around the cable exiting the basket. The cable diameters are a slim 2.1mm yet extremely durable with an ultra-flexible PUR Polyurethane Jacket material that is crush resistant, tear-resistant and cold-resistant.

Read more less

PRICE INCLUDES UK VAT Mini-ALTO Stereo Y-cable uses Low-Profile right angle XLR 5-pin Female to Straight XLR 5-pin Male ø2.85mm cables. Perfect for use in the Mini-ALTO windshield series with MS pairs, such as the Sennheiser MKH 8018. The cables length are 260mm, and therefore designed to be used with the Mini-ALTO in a boom adaptor configuration. The cable also have a cable plug designed to fit into the cable exit of the Mini-ALTO smiley face, made from an ultra-soft TPE material - for creating a seal around the cable exiting the basket. The cable diameter is a slim 2.85mm yet extremely durable with an ultra-flexible PUR Polyurethane Jacket material that is crush resistant, tear-resistant and cold-resistant.

Read more less

The RAD-1 Shock Mount, CCM/CMC Edition comes in an all black & grey matte finish with no blue colour on the hoops or mic clips. They are designed to be used with Schoeps CCM and Collette series microphones, including the CMD 42. This suspension provides exceptional isolation from movement, low-end handling noise and other vibrations associated with booming.  The mount comes fitted with two dark grey rubber coated universal mic clips and an extra 8mm black coloured rear mic clip for Lemo connectors. Each mount includes a pair of standard firmness hoops (black) and a pair of softer hoops (dark grey) - so you can get the best isolation for your style of booming. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). A 200mm long Lemo to XLR cable is included. The RAD Shock Mounts are made in England.

Read more less

18" (inch) LPS Low-Profile TA3F to TA3F cable. Perfect for Lectrosonics SR Receivers with SREXT bottom or SRBATTSLED into Sound Devices 633, 688, 664 [CL-6], 788T TA3M Line inputs and other compatible gear. Using the same concept as our LoPro XLR connectors, mini set-screws lock down the colour cap securely and allow for degree of outlet adjustment. The outlet can be set to either Left or Right of the release pin for maximum flexibility. Our Lo-Pro cables significantly reduce the profile of interconnect panels. The cable diameter is a slim 2.7mm yet extremely durable with an ultra-flexible PUR Polyurethane Jacket material that is crush resistant, tear-resistant and cold-resistant. The 12" length is great for the first two channels of the mixer to reduce cable slack.

Read more less

Dual set of all 10 color caps for LPS Low-Profile right angle TA "Mini XLR" and CT-LPS-T35 3.5mm TRS Connectors. Customize your color profile at any time. Set includes (2) each Black, Red, Blue, Green, Yellow, Orange, White, Gray, Purple and Brown. Standard cap accepts cable diameters up to 3.2mm. Injection moulded in rock-solid durable ABS thermoplastic to assure maximum impact resistance and toughness. Compatible with all Cable Techniques LPS Series 3-pin, 4-pin and 5-pin TA "Mini XLR" and CT-LPS-T35 3.5mm TRS connector types.

Read more less

24" (inch) Low-Profile XLR-3F to XLR-3M Adjustable Angle XLR 3-pin cable. The XLR side-exit cable outlet orientation is user adjustable from 30° to 150° and 210° to 330° from the release button allowing for perfect integration into any location audio kit. The cable diameter is a slim 3.2mm yet extremely durable with an ultra-flexible PUR Polyurethane Jacket material that is crush resistant, tear-resistant and cold-resistant. Perfect for Lectrosonics UCR type receivers into XLR inputs of field gear like Sound Devices 633, 688, 788T, 302, 552, Zaxcom, Zoom and many others. Our Lo-Pro cables are up to 40% lighter than standard XLR cables while significantly reducing the profile of anything they are plugged into. We use premium quality slim cable that is crush resistant, tear-resistant, cold-resistant and easy to wind.

Read more less

Mini-ALTO cable uses Low-Profile right angle XLR 3-pin Female to Straight XLR 3-pin Male, using Mogami W2901 ø2.1mm cable. Perfect for use in the Mini-ALTO windshield series with mono mics. The cable length are 260mm, and therefore designed to be used with the Mini-ALTO in a boom adaptor configuration. The cable also have a cable plug designed to fit into the cable exit of the Mini-ALTO smiley face, made from an ultra-soft TPE material - for creating a seal around the cable exiting the basket. The cable diameter is a slim 2.1mm yet extremely durable with an ultra-flexible PUR Polyurethane Jacket material that is crush resistant, tear-resistant and cold-resistant.

Read more less