Shop All Products
-
Mini-ALTO Thin 3-pin XLR Short Jumper Cable, 2.1mm X 260mm
Mini-ALTO cable uses Low-Profile right angle XLR 3-pin Female to Straight XLR 3-pin Male, using Mogami W2901 ø2.1mm cable. Perfect for use in the Mini-ALTO windshield series with mono mics. The cable length are 260mm, and therefore designed to be used with the Mini-ALTO in a boom adaptor configuration. The cable also have a cable plug designed to fit into the cable exit of the Mini-ALTO smiley face, made from an ultra-soft TPE material - for creating a seal around the cable exiting the basket. The cable diameter is a slim 2.1mm yet extremely durable with an ultra-flexible PUR Polyurethane Jacket material that is crush resistant, tear-resistant and cold-resistant.
£54.00
-
Mini-ALTO 480 Windshield Kit
The Mini-ALTO & RAD-2 Kit is a compact and versatile microphone windshield and shock mounting system for location sound professionals. It features the award winning RAD shock mount for exceptional isolation from handling noise, an ultra-lightweight 2-part magnetic "pod" windshield that can be fitted/unfitted in seconds and a removable fur cover for added wind protection. The Mini-ALTO 480 size windshield kits come in full kits which include the windshield, a RAD-2 Mount, spare hoops with different suspension firmness, a fur windcover, a "smiley face" adaptor, pistol grip handle and a magnetic stowage holder for the windshield with a caribiner clip. If you already have a RAD-2 Shock Mount, there is an 480 size Add-On Kit available which has the parts needed to convert a RAD mount into a full coverage Mini-ALTO windshield. Fits: Audio-Technica AT8015; Sennheiser MKH8070; Shure VP89L Achieves up to 40dB of wind noise reduction when using on the Mini-ALTO windshield - equivalent to many larger sized windshields "Dome Foam" inserts are included on the inside end of the windshield pod to prevent long shotgun microphones from inadvertently making noise whilst moving around Shock mount & MA480 Windshield Pods: 323g MA480 Fur Windcover: 171g Combined: 494g Made in the U.K.
£360.00 - £456.00
-
15cm Nimbus Windshield (19/22), Black Fur
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits: Audio-Technica AT897, BP4029; Neumann KMR 81 i; Rode NTG-1, NTG-2; Sanken CS-1e, CSS-50; Schoeps CMIT 5 U; Sennheiser MKE600 Fits other small shotgun microphones 19-22mm in diameter and with slots less than 15cm from end of mic Made in England from high quality acoustic synthetic fur with a porous open cell foam core
£79.20
-
10cm Nimbus Windshield (19/22), Black Fur
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Fits older model camera microphones like: Sony ECM-XM1, HDV Z7; JVC MV-P615 Fits other small shotgun microphones 19-22mm in diameter and with slots less than 10cm from end of mic Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Made from high quality acoustic synthetic fur with a porous open cell foam core Sony ECM-XM1, HDV Z7; JVC MV-P615
£74.40
-
RAD Mount Replacement 360 XLR Holder
Replacement 360-degree XLR holder attachment for RAD mount boom adaptor. Removable from RAD mount boom adaptor. Unique design only works with RAD Mount boom adaptors. Snugly holds the XLR stem with a thumbwheel screw to tightly lock in place.
£24.00
-
18cm Nimbus Windshield (24/25)
PRICES INCLUDE UK VAT The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits Sennheiser MKH60 and other shotgun microphones 24-25mm in diameter and with slots less than 18cm from end of mic Made in England from high quality acoustic synthetic fur with a porous open cell foam core
£79.20
