Radius Windshields is a trading brand of Slapton Sound Limited, a company registered in England, No. 13922515. The company's registered office is Harris & Trotter LLP, 101 New Cavendish Street, London W1W 6XH. Company VAT No. GB 437065592; Company EORI No: GB 092765283000
Products
-
Mini-ALTO Windshield Stowage Holder with Carabiner Clip
The Mini-ALTO Windshield Stowage Holder with Carabiner Clip allows you to quickly place the front and rear windshield pods onto a magnetic clip to keep them together and at arms reach when not using. This way you can hang the windshield onto your harness, cart or bag when using a microphone on the RAD Shock Mount by itself, with just a foam or other type of slip on windscreen.
£30.00
-
MKH50 Mic Foam
PRICES INCLUDES UK VAT The Radius range of condenser and shotgun microphone foams are made from high-quality acoustic foam designed to prevent plosives, boom swings swooshes and other light wind noise, whilst not interfering with high frequency audio capture. These are not the typical cheap mic foams that turn to dust in your fingers and fade away fast. Radius foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture. For shotgun microphones, the tapered foam is wider in the back to provide more side wind protection around the capsule. The foam narrows toward the front to provide additional protection around the interference tube whilst allowing for maximum transparency. These foams come in 3 internal diameter sizes and a variety of lengths to fit many broadcast, camera and recording microphones. Mic foams protect against plosives, swooshes and light wind noise Fits: Sennheiser MKH20, MKH30, MKH40, MKH50; Sony ECM-MS2 Fits other small pencil condenser and instrument microphones 24-25mm in diameter, with slots less than 5cm from end of mic Foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture
£15.00
-
MKH60 Shotgun Mic Foam
PRICES INCLUDE UK VAT The Radius range of condenser and shotgun microphone foams are made from high-quality acoustic foam designed to prevent plosives, boom swings swooshes and other light wind noise, whilst not interfering with high frequency audio capture. These are not the typical cheap mic foams that turn to dust in your fingers and fade away fast. Radius foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture. For shotgun microphones, the tapered foam is wider in the back to provide more side wind protection around the capsule. The foam narrows toward the front to provide additional protection around the interference tube whilst allowing for maximum transparency. These foams come in 3 internal diameter sizes and a variety of lengths to fit many broadcast, camera and recording microphones. Mic foams protect against plosives, swooshes and light wind noise Fits Sennheiser MKH60 and other shotgun microphones 24-25mm in diameter, with slots less than 18cm from end of mic Foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture
£21.00
-
Pair of RAD 12.5mm Mic Clips (Clips Only - No Hoops)
Pair of RAD mount 12.5mm mic clips with no soft rubber coating. Fits in all firmness styles of RAD-1 or RAD-2 isolation hoops. No additional safety strap added. Replacement mic clips to fit 12.5-14.5mm microphones like the LOM Uši Pro and Core Sound TetraMic 1st Order Ambisonic.
£18.00
-
Pair of RAD 19/20mm Mic Clips (Clips Only - No Hoops)
Pair of RAD mount 19-20mm mic clips with no soft rubber coating. Fits in all firmness styles of RAD-1 or RAD-2 isolation hoops. These clips do not come with an additional safety strap. Replacement mic clips for 19-20mm microphones like DPA 4018C, LOM BasicUcho, Sennheiser MKH 8050, Sennheiser 8060 and Deity S-Mic 2
£18.00
-
Pair of RAD 8mm Mic Clips (Clips Only - No Hoops)
Pair of RAD mount 8mm mic clips with no soft rubber coating. Replacement mic clips for microphones with Lemo or MZL cables. Fits in all firmness styles of RAD-1 or RAD-2 isolation hoops. These clips do not come with a safety strap.
£18.00
-
Pair of RAD MKH50 Mic Clips (Clips Only - No Hoops)
Pair of RAD Mount MKH square style mics clips to fit Sennheiser MKH20, MKH30, MKH40, MKH50 & MKH60. Each clip comes with a safety strap.Each clip fits each hoop we have for the RAD-1, RAD-2 & RAD-3 shock mounts.
£18.00
-
Pair of RAD MS Double Mic Clips
Pair of MS Double Mic Clips suitable for mounting 19-21mm mic pairs in mid-side stereo configuration. These clips space MS paired mics at a very close 2.5mm apart and have adjustment screws for lower mic clips to get perfect vertical alignment. The clips come with safety straps to hold both mics in place, as well as a pair of 8mm inserts for holding MZL or Lemo connectors in the rear mic clips. The clips come in 2 sizes: MS19 for 19mm diameter microphones and MS20 for 20-21mm microphones. Double mic clips for MS pairs of mics 19-21mm in diameter Can be used on RAD-2 or RAD-3 mounts and inside Mini-ALTO windshield kits Mic clips have vertical alignment adjustment screws and safety straps to hold both mics in place Comes with a pair of 8mm inserts for use with MZL or Lemo connectors in the rear mic clips MS19 (dark blue colour) Fits: Sennheiser MKH8030/80X0; and other 19mm diameter microphone pairs MS20 (light blue colour) Fits: Schopes CCM MS pairs, CMC1 MS pairs, CMC6 MS pairs, MiniCMIT/CCM pair; and other 20-21mm microphone pairs
£36.00
-
Pair of RAD Universal Mic Clips
Pair of RAD universal mic clips to fit on RAD isolation hoops. These clips will fit microphones with a diameter of 19-25mm, including square bodied mics. The insides have soft rubber lining to grip mics securely whilst not damaging the finish. The mic clips come with removable rubber straps to hold mics securely in place when needed. This product consists of mic clips only - does not come with isolation hoops.
£24.00
-
Pair of RAD Universal Mic Clips, Dark Grey Soft Grip (Clips Only - No Hoops)
Pair of RAD mount universal Dark Edition mic clips (dark grey) to fit mics 19-25mm in diameter. The mic clips are soft coated on the inside and fit on all styles of RAD mount isolation hoops. Fits round mics 19-25mm in diameter and on square-bodied mics like the Sennheiser MKH50.
£24.00
-
Pair of RAD-1 Hoops, Soft Firmness (Light Blue)
Pair of RAD-1 Hoops in soft firmness (light blue). These hoops provide a softer suspension for small and lightweight condenser microphones than the standard firmness hoops (black). The RAD-1 hoops are best used indoors when with the mic by itself or mic with foam. These hoops will fit in all RAD shock mount top brackets. This product consists of isolation hoops and screws only - does not come fitted with mic clips.
£18.00
-
Pair of RAD-1 Hoops, Soft Firmness 62-Shore (Dark Grey - Hoops Only)
Replacement pair of soft firmness, Dark Edition (dark grey) RAD-1 hoops for use with any RAD mount base or Radius windshield blimp. Hoops only (mic holder clips sold separately). Comes with 4 mounting screws - 8mm long (fits base and tops). Hoops have a flat top and are recommended to be used with smaller condenser mics. Screws included
£18.00
-
Pair of RAD-1 Hoops, Standard Firmness (Black)
Pair of RAD-1 Hoops in standard firmness (black). These hoops provide optimal suspension for most condenser and shorter directional microphones. The RAD-1 hoops are best used indoors with the mic by itself or the mic with a foam. These hoops will fit in all RAD shock mount top brackets. This product consists of isolation hoops and screws only - does not come fitted with mic clips.
£18.00
-
Pair of RAD-2 Hoops, Extra Firm 82-Shore (Dark Blue - Hoops Only)
Replacement pair of extra firm (dark blue) RAD-2 hoops for use with any RAD mount base or Radius windshield blimp. Hoops only (mic holder clips sold separately). Hoops have 3mm spine / bracing on top for use with longer or front-heavy mics. Comes with 4 mounting screws - 2 x 8mm long (for base) and 2 x 12mm long (for tops) Suitable for heavier/longer microphones like the Sennheiser MKH 416, MKH60 & Schoeps CMIT 5U. Screws included
£18.00
-
Pair of RAD-2 Hoops, Extra Soft 55-Shore (Dark Green - Hoops Only)
Replacement pair of 55-Shore extra soft (dark green) RAD-2 hoops for use with any RAD mount base or Radius windshield blimp. Hoops only (mic holder clips sold separately).
£18.00
-
Pair of RAD-2 Hoops, Soft Firmness (Light Blue)
Pair of RAD-2 Hoops in soft firmness (light blue). These hoops provide a softer microphone suspension than standard hoops (black). The extra bracing along the top allows for use with longer mics or when using a slide-on windshield on the front. These hoops will fit in all RAD shock mount top brackets. This product consists of isolation hoops and screws only - does not come fitted with mic clips.
£18.00
-
Pair of RAD-2 Hoops, Soft Firmness 62-shore (Dark Grey - Hoops Only)
Replacement pair of soft firmness, Dark Edition (dark grey) RAD-2 hoops for use with any RAD mount base or Radius windshield blimp. Hoops only (mic holder clips sold separately). Hoops have 3mm spine / bracing on top for use with longer or front-heavy mics. Comes with 4 mounting screws - 2 x 8mm long (for base) and 2 x 12mm long (for tops) Screws Included
£18.00
-
Pair of RAD-2 Hoops, Standard Firmness (Black)
Pair of RAD-2 Hoops in standard firmness (black). These hoops provide optimal suspension for most shotgun microphones. The extra bracing along the top prevents front sagging when using longer mics or when using a slide-on windshield. These hoops will fit in all RAD shock mount top brackets. This product consists of isolation hoops and screws only - does not come fitted with mic clips.
£18.00
-
Puffer Urchin Lav windshield, Foam Core, Black - Single/Pair
PRICE INCLUDES UK VAT The Puffer Urchin Lav windshields are made to fit miniature lavalier mics 2-4mm in diameter. The Puffer Urchins are made from synthetic black fur with a built in foam core for added wind protection. These have a low profile that is approximately 35mm across from end-to-end. Puffer Urchins provide great protection for outdoor ENG interviews or other situations where the lav mics are exposed to more wind. These also have a unique blue "safety strap" which holds the fur firmly in place. We sell these as a SINGLE pack or a PAIR.
£18.00 - £33.00
-
Puffer Urchin Lav windshield, Foam Core, Black - Single/Pair
The Puffer Urchin Lav windshields are made to fit miniature lavalier mics 2-4mm in diameter. The Puffer Urchins are made from synthetic black fur with a built in foam core for added wind protection. These have a low profile that is approximately 35mm across from end-to-end. Puffer Urchins provide great protection for outdoor ENG interviews or other situations where the lav mics are exposed to more wind. These also have a unique blue "saftey strap" which holds the fur firmly in place. Fits miniature lavalier mics 2-4mm in diameter such as: Countryman B6; DPA 6060; Deity W.Lav Pro; Sanken COS-11; Sennheiser MKE 1; Voice Technologies VT401/403 Includes: 2 x Puffer Urchin Lav Windshields
£33.00
-
RAD Cable Straps (10 Pack)
Pack of 10 Radius brand "light blue" or "Black" cable straps made from high quality TPE silicone-based polymer that is latex free. The cable straps are designed to replace noisy or scratchy hook & loop straps. Perfect for: Cable Management Organization with Wires/cords Attaching to Boom Poles Attaching to Shock Mounts General cable organisation. The straps have a "cable-stay" side which locks the strap into place on the cable so it doesn't fall off. Each pack contains 10 cable straps: 5 x straps that are 60mm long 5 x straps that are 100mm long. Choose between Black or Light Blue. These cable straps are MADE IN THE U.K.
£12.00
-
RAD Cable Straps, Light Blue (10-Pack)
Pack of 10 Radius brand "light blue" cable straps made from high quality TPE silicone-based polymer that is latex free. The cable straps are designed to replace noisy or scratchy hook & loop straps. The straps have a "cable-stay" side which locks the strap into place on the cable so it doesn't fall off. Each pack contains 10 cable straps: 5 x straps that are 60mm long 5 x straps that are 100mm long. These cable straps are MADE IN THE U.K.
£12.00
-
RAD Low Profile 3-Pin XLR Cable (275mm)
This low profile 3-Pin XLR jumper cable is made to fit all RAD shock mounts. The cable itself is 275mm long and has a 90-degree female XLR connection and straight male XLR connection. The cable length and width are designed to fit in the RAD shock mount cable footings with additional slack for strain relief and repositioning of microphones.
£48.00
-
RAD Mount Boom Adaptor w/ 360 XLR Holder
RAD Mount boom adaptor with 360 XLR holder can be purchased as a replacement for a RAD-1/2 or to convert a RAD-3 mount into a a boom mount without the handle. Boom adaptor works with all RAD mounts. Simply screw on using the thumbwheel attached to the RAD top bracket. Comes with 360-degree XLR holder 3/8 threaded base to fit on boom poles or stands XLR holder turns in both directions. Screw tightly onto boom pole or stand to lock it into place. Bottom boom mount adaptor and XLR holder only. Other RAD mount parts sold separately.
£30.00
You have seen 120 out of 144 products